How to use RoHS tester

Reasonable usage methods can not only ensure the normal use of the instrument and reduce malfunctions, but also ensure the accuracy of the results and extend its service life. So how should the Skyray Instrument RoHS tester be used reasonably?

1. Cleaning of the surface and shell. The instrument can be cleaned with a slightly damp cloth. Do not use alkaline or acidic detergents. Use neutral detergents instead.

2. It is strictly forbidden for non-specially designated personnel to operate the instrument. The operation must be carried out according to the operating steps. Any wrong operation will affect the test results and service life of the instrument;

3. Reasonable working environment of the equipment. It is required to be installed in a place without electromagnetic interference such as motors, vibration, electromagnetic, high voltage or high-frequency welding machines, otherwise it will interfere with the spectrum of the equipment or cause the equipment to malfunction;

4. Cleaning of the interior and detector. During the cleaning process, be careful not to drop foreign objects into the test window. The test window should be kept clean. Do not use hard objects to touch the test window to prevent damage to the detector window and X-ray tube window. (Damage to the detector window and X-ray tube window will not be covered by warranty, and replacement is expensive. Therefore, be careful when cleaning and using it);

5. When the instrument is in operation, do not open the protective cover of the instrument or point the test instrument at the human body;

6. Do not place tea cups, heavy objects or other items not related to the test on the instrument to avoid contamination or damage to the instrument;

7. The instrument must be calibrated every time it is turned on and every 4 hours of continuous operation;

8. This instrument will generate ionizing radiation. Make sure not to point the instrument at people during testing.

9. Do not point the RoHS tester at the air for testing; do not hold the sample in your hands for testing.

Precautions for using RoHS tester

1. The instrument will generate ionizing radiation. Make sure not to point the instrument at people during testing; do not point the instrument at the air for testing; do not hold the sample in your hands for testing;

2. When the ROHS tester is in operation, do not open the protective cover of the instrument or point the tester at the human body;

3. The instrument must be calibrated every time it is turned on and every 4 hours of continuous operation;

4. It is strictly forbidden for non-specially designated personnel to operate the instrument. The operation must be carried out according to the operating steps. Any incorrect operation will affect the test results and service life of the instrument.

5. After the test is completed, click the "Set" X-ray tube button, click the "Turn on high voltage power supply" button in the dialog box that appears, and then click OK. You can proceed to the next step only when the tube pressure and tube flow are OK. Click the "Close button" in the upper right corner of the operation interface. After the software is closed, you can close the hardware.