TLV2432AIPWLE

Basic information of TLV2432AIPWLE amplifier:

TLV2432AIPWLE is an OPERATIONAL AMPLIFIER from Texas Instruments. Commonly used packaging methods are PLASTIC, TSSOP-8

TLV2432AIPWLE amplifier core information:

The minimum operating temperature of the TLV2432AIPWLE is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.00015 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLV2432AIPWLE has a nominal slew rate of 0.25 V/us. The maximum slew rate of the TLV2432AIPWLE given by the manufacturer is 0.25 mA, while the minimum slew rate is 0.1 V/us. Its minimum voltage gain is 1000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLV2432AIPWLE gain becomes 0.707 times the low-frequency gain is 500 kHz.

The nominal supply voltage of the TLV2432AIPWLE is 3 V. The power supply range is: 3/5 V. The input offset voltage of the TLV2432AIPWLE is 1500 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLV2432AIPWLE:

The width of TLV2432AIPWLE is: 3 mm and the length is 4.4 mm. TLV2432AIPWLE has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

TLV2432AIPWLE amplifier additional information:

TLV2432AIPWLE adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TLV2432AIPWLE is: YES. Its temperature grade is: INDUSTRIAL.

It is a micropower amplifier. TLV2432AIPWLE is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDSO-G8. The packaging code of TLV2432AIPWLE is: TSSOP.

The materials used for TLV2432AIPWLE packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. TLV2432AIPWLE package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.2 mm.