9.6 mm2, 1 Watt, 64-bit Processor: The Upcoming QorIQ LS1012A Overview
Latest update time：2016-03-04
Reads：
Overview
QorIQ LS1012A processor
Optimized for space-constrained, battery-powered or USB-powered networking and IoT applications, it integrates a single ARM Cortex-A53 core running at up to 800 MHz, equipped with a hardware packet forwarding engine and high-speed interfaces, capable of providing line-speed network performance at a typical power loss of 1W and in an ultra-small package. The LS1012A uses the same trusted architecture and software compatibility as higher-level QorIQ LS series devices, supporting scalable security applications that leverage common 64-bit software platforms.
characteristic
- Core Complex
• Single 600 or 800 MHz ARM Cortex-A53 core
• 32 KB-I and 32 KB-D ECC protected cache
• 256 KB L2 ECC protected cache
• Coremarks performance over 2000
——Network components
• Three-lane SerDes, up to 6 GHz, multiplexed between controllers, supporting:
• 1 PCI Express® Gen2 interface
• 1 SATA 3.0 port
• Two 1Gb or 2.5Gb Ethernet controllers
--Accelerators and storage controllers
• Packet Forwarding Engine Binary
• Integrated Security Engine (SEC)
• 16-bit DDR3L memory controller
• QuadSPI Flash Controller Interface
——Basic peripherals and interconnects
• 1x USB 3.0 + PHY
• 1x USB 2.0 + ULPI
• 1x SPI, 2x I2C
• 2x SD3.0 / SDIO / eMMC
• 2x UART
• 5x I2S
Other features
• QorIQ Trust Architecture
• ARM TrustZone
• 9.6 x 9.6mm L-BGA package
Target Applications
• Trusted IoT Gateway
• Consumer Electronics NAS
• Mobile NAS (battery powered)
• Ethernet drives for data center storage
• Entry-level Broadband Ethernet Gateway
• Building and factory automation
The LS1012A processor
will be available in April 2016 and is available for pre-order now. For more information and sample availability, please contact your local
NXP sales office
or
NXP authorized distributor
.
京公网安备 11010802033920号