Now I provide an ADC subroutine that I wrote myself, which has been verified by many people and can be used.The subroutine is as follows:
#include "AppAdc.h"
#include inc/hw_types.h
#include ti/sysbio
The most common ways to write SPI polarity and phase are CPOL and CPHA, but there are also some other ways to write them, which are briefly summarized as follows:SPI's CPOL indicates whether the SCLK
Engineers are constantly looking for the simplest solution to complex system design challenges. Consider the U-NII 1-8, 5, and 6 GHz solutions. In this article, we will review how best-in-class bandBo
Collection plan (1)
TI C5000 DSP has the characteristics of low power consumption, high performance and low cost. Among them, TMS320VC5502 has a clock speed of up to 300M, can expand 2MB of sdram, has
Since the use of timer conflicts with serial communication, the reason should be that serial port 0 uses timer 1 as the clock. Therefore, after enabling timer 1 (timing time is 100us) according to the