Design of USB Communication System Based on FPGA

Recommended ContentMore

Open source project More

• pcb1
• STM32F412ZG MCU Discovery Kit
• ESP32 flight control
• KIT33882EKEVB: Evaluation Kit MC33882 - Smart Six-Channel Output Switch (0.3 Ω On-Resistance) with SPI and Parallel Input Control
• STM32F411RET
• electric heater demo
• Luo Xiaohei pendant
• 【Training Camp】Four-Legged Dog
• 19V-75W Laptop Adapter with Tracking Boost PFC Preregulator Using L6563 and L6566A
• NCP51810GAN1GEVB: 100V eGaN Half-Bridge Gate Driver Evaluation Board

Searched by Users

• KiCAD official package library
• Siemens PLC routine_S7-200 program to calculate the cumulative flow using timer interrupt
• Agilent VEE Pro 9.2 Redefine your design-sooner
• Omron CP1E Chinese Programming Manual 3
• Renesas MCU Download Software
• Siemens S7-400 Automation System & CPU Specifications
• Microwave Engineering (Fourth Edition) (David M.Pozar)
• [Communication_Electronics] FreeSWITCH+VoIP+Practical
• Python Chinese Manual
• Data Structure and Algorithm Analysis C++ Description 3rd Edition PDF Contains (Answers) .7z

Just Take a LookMore

• I'm learning SOC FPGA recently. I don't know if any great god has a bare metal tutorial. I'm a newbie, the more detailed the better.
  I'm learning SOC FPGA recently. I don't know if any great god has a bare metal tutorial. I'm a newbie. The more detailed the better. I've been reading for two months and have no clue.
• Understanding of Bluetooth protocol based on TI cc2540 module
  Platform：TI IC:cc2540 Environment：windows 7 tools：IAR 8.20.2 demo Code：BLE_CC254x_1.4.0 from TIPhysical layer: 1Mbps adaptive frequency-hopping GFSK radio frequency, operating in the license-free 2.4G
• STM32 sets different input and output modes for different pins of the same IO port
  Different pins of the same group of io ports of stm32 are set to different input and output modes. For example, PA1 of PA port is used as input to read input value, and PA2 is used as output to output
• [SC8905 EVM Evaluation] Power Supply Ripple Test
  By the way, I did a ripple control test: input 5V3A switching power supply output setting 9.2VNote: The following results are for the probes clamped on the test posts of the EMC board, and the spacing
• Mbed OS changes the way it is released
  Recently, MBed announced a change in the distribution method on the official blogFrom: https://os.mbed.com/blog/entry/Changeof ... seprocess/OverviewIn the past few months, we have been considering ch
• STM32MP157A-DK1 Evaluation + SPI Device
• How to define a const structure variable
• [Silicon Labs BG22-EK4108A Bluetooth Development Review] Received the fastest, unboxing
• Introduction to three interrupt debugging methods of ARM
• Ask a superconductivity question

Trending Downloads

• Electronics and Electric Power (Jia Zhengchun, Ma Zhiyuan, 2002)
• [Document]-JIS B9936-2001 Hydraulic power. Particle contamination analysis. Extraction of liquid samples on operating system lines.pdf
• Mobile communication audio and video application solutions
• Application of Lightning Arrester for Transmission Lines
• A campus navigation system developed based on S3C44B0X
• A robust and adjustable topology algorithm with stable links in wireless sensor networks
• Multi-computer communication program and interface design in distributed temperature measurement system
• Proteus simulation based on 8051 - playing a piece of music
• EZDSPF2808 development board schematic diagram
• 430 MCU Timer

Trending ArticlesMore

• Amplifier input impedance parameters and application simulation
• Run, wireless charging!
• Did Intel really lose?
• [Chongqing Station] Registration for Melexis Sensing Technology Tour Seminar is now open!
• common problem
• Apple's most ambitious chip plan yet
• Summary of the Semiconductor Equipment Market in 2020
• ​ADI & Shijian will help you understand chemical analysis and analytical instrument application solutions. Answer questions and win prizes!