85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
"We have turned the US's choke point list into our scientific research task list, such as bearing steel, lithography machines, and some key core technologies. We will strive to focus on the major area...
This content is originally created by Uncle Hai , a user on the EEWORLD forum. If you want to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source
In...
1. Function OverviewZstar 's Zynq PL is connected to 3 LED indicators. As shown in the figure, the 3 LED indicators are connected in series with a 510 ohm current limiting resistor at the positive pol...
The hardware white-boxization of O-RAN needs to go through five stages, and this article focuses on the third stage.
Phase 1: Based on general-purpose computer hardware
Phase 2: Dedicated daughter car...
I originally raised the message box at the bottom to see the warning message, but I tried many times to adjust it back but failed. Sometimes it didn't respond, and sometimes the window was separated. ...
As the saying goes, a warm winter will inevitably bring a cold spring, and cotton will not be harvested until after Grain Rain. As Grain Rain passes, China will usher in the plum rain season, the las...[Details]
Tianyancha shows that Xinneng Semiconductor has completed a new round of Series B financing with a financing amount of nearly 100 million yuan. Investors include Midea Capital, Jinbang Capital, Falco...[Details]
1. Introduction to OLED Organic Light-Emitting Diode (OLED), also known as organic laser display or organic light-emitting semiconductor, was discovered by Chinese-American professor Ching W. Tang in...[Details]
Due to the continuous breakthroughs in display manufacturing technology, folding screens have also become a new selling point for mobile phone terminals. Huawei, Samsung, OPPO, Xiaomi, Honor and othe...[Details]
The popularity of foldable smartphones has grown in recent years, with a new report suggesting that shipments of foldable smartphones are expected to exceed 18 million units by the end of 2022. Acc...[Details]
1. Definition of GPIO 2. GPIO mapping 3. GPIO mode one of gpio.OUTPUT, gpio.OPENDRAIN, gpio.INPUT, or gpio.INT (interrupt mode); 4. GPIO related API pin = 1 gpio.mode(pin,gpio.OUTP...[Details]
Recently, Shanghai Semiconductor Equipment and Materials Fund announced that it has successfully acquired a stake in Huazhuo Precision Technology. According to Huazhuo Precision Technology's official...[Details]
The design of electromagnetic interference mentioned in this article is mainly carried out from the hardware and software aspects. The following is an introduction to the treatment of electromagnetic ...[Details]
Initialization of 8155 chip: 8155 is an external interface chip for the microcontroller
, and its operation method is the same as that of external RAM. That is:
MOV DPTR, # addr16
MOV A, ...[Details]
introduction
Digital filter is a basic processing component in applications such as speech and image processing, pattern recognition, radar signal processing, and spectrum analysis. It...[Details]
On the evening of March 16, Huawei released a new mobile phone, P50E, which is a derivative version of P50. Now, Huawei's official website has put the P50E on pre-sale, with 8GB+128GB priced ...[Details]
Key points and methods of welding electronic components
Soldering components with an electric soldering iron is a basic assembly process, which plays a key role in ensuring the quality of electroni...[Details]
Sudhanshu1414 exposed the rendering of OnePlus 7T with a case on the social networking site, which still uses the "Oreo" horizontally arranged three-camera design. Judging from the pictur...[Details]
The SCCB bus of OV7670, which made me miss it day and night, was finally solved today. I spent nearly 5 days on it. I thought about it on the way to work, when I was eating, when I was going to the t...[Details]
Industrial Personal Computer (IPC) is a computer system designed specifically for industrial automation and process control. In the field of industrial control, bus technology is one of the key tec...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
