Parallel - Fundamental Quartz Crystal, 15.999MHz Nom, SMD, 4 PIN
ABM8-15.999MHZ-6-G-T2 Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
7252614906
package instruction
SMD, 4 PIN
Reach Compliance Code
compliant
Country Of Origin
Mainland China
YTEOL
7.23
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.0015%
frequency tolerance
50 ppm
JESD-609 code
e4
load capacitance
6 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
15.999 MHz
Maximum operating temperature
60 °C
Minimum operating temperature
-10 °C
physical size
3.2mm X 2.5mm X 0.8mm
Series resistance
120 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM8-15.999MHZ-6-G-T2 Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
Author: Garrick Dai
In the control of brushless DC motors (BLDC), Lead Angle is often used, whether for sensored or sensorless motors. Because the motor coil is an inductive load, the current in the c...
( 1) Four surgeons sat around and talked about what kind of people they liked to operate on. The first doctor said, "I like to operate on librarians the most. When you open their bodies, everything is...
This post briefly introduces the three tasks in Systick interrupt and ADC interrupt. In the previous post ( 【Development and Application Based on NUCLEO-F746ZG Motor】7. Program Framework-Two Important...
The standard for small mirrorless cameras is gradually being set, and Sony's micro single camera is the future direction
Since the film era, the film size has been the decisive factor in image...[Details]
Currently, many companies around the world are equipped with collision avoidance technology from Mobileye, a subsidiary of Intel. Mobileye is helping them reduce the rate of road collision accidents ...[Details]
With the popularity of electric vehicles, the importance of the on-board charging unit (OBC) has become increasingly prominent. It is not only responsible for providing power to electric vehicles, ...[Details]
In this section, I plan to use the SysTick timer to delay and make the two lights on the STM32F429 Discovery board flash. SysTick is included in the Cortex core and exists in Cortex products from dif...[Details]
background The proliferation of ultra-low power wireless sensor nodes for measurement and control, coupled with the use of new energy harvesting techniques , has made it possible to power fully au...[Details]
Abstract: This paper studies and analyzes the subtitle data format of the ETS 300 743 specification in the DVB standard, and combines the demultiplexing filter, layer processing and user interface ...[Details]
Yesterday, TF International analyst Ming-Chi Kuo released a report titled "Yujingguang's EPS may not grow in 2021", pointing out that it is estimated that Yujingguang's EPS in 2021 may not grow due t...[Details]
1. General requirements for LED drivers The arrangement of LEDs and the specifications of LED light sources determine the basic driver requirements. The main function of an LED driver is to...[Details]
PIC microcontrollers are becoming increasingly popular in China. This article introduces some experiences and techniques in software and hardware design during the development of Microchip PIC seri...[Details]
1. Overview
From the weighing principle, we know that the instantaneous flow of the material measured by the electronic belt scale depends on two parameters, namely, the instantaneous flow is ...[Details]
Since the second half of 2018, some institutions have predicted that the global semiconductor industry will enter a downward cycle. Due to the Sino-US trade war, the Japan-Korea war, the decline in d...[Details]
Currently, medical appliance OEMs are developing more technologically advanced personal healthcare devices for treating and monitoring common diseases. These products are reasonably priced and have gr...[Details]
In recent years, smartphones have become the fastest growing segment in the overall mobile phone market. For smartphones, differential signaling is increasingly provided through serial interface stand...[Details]
Automotive chip grade
According to the automotive electronics standards set by the United States, automotive chips are divided into five levels, the smaller the number, the higher the level.
...[Details]
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
