Parallel - Fundamental Quartz Crystal, 3.579545MHz Nom, HC/49US, 2 PIN
ABL2-3.579545MHZ-10-4H-L2-TRAY Parametric
Parameter Name
Attribute value
Is it lead-free?
Lead free
Is it Rohs certified?
conform to
Objectid
1323117555
package instruction
HC/49US, 2 PIN
Reach Compliance Code
compliant
Country Of Origin
Mainland China
YTEOL
6.25
Other features
AT-CUT; TRAY
Ageing
5 PPM/YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
100 µW
frequency stability
0.0035%
frequency tolerance
30 ppm
load capacitance
10 pF
Installation features
THROUGH HOLE MOUNT
Nominal operating frequency
3.579545 MHz
Maximum operating temperature
70 °C
Minimum operating temperature
physical size
L11.5XB5.0XH2.5 (mm)/L0.453XB0.197XH0.098 (inch)
Series resistance
180 Ω
surface mount
NO
ABL2-3.579545MHZ-10-4H-L2-TRAY Preview
HC/49US (AT49) MICROPROCESSOR CRYSTAL
ABL2 Series
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed
and not Moisture Sensitive - MSL = N/A: Not Applicable
Pb
RoHS/RoHS II
11.5 x 5.0 x 2.5 mm
| | | | | | | | | | | | | | |
FEATURES:
• Reduced height at 2.5mm
• High reliability & Low Cost
• Tight stability & extended temperature
• Proven resistance welded metal package
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Minimum
3.579545
3.579545
Operation mode
24.01
24.01
Operating Temperature
Storage Temperature
Frequency Tolerance
Frequency Stability over the Operating
Temperature
(
ref. to +25°C)
Equivalent series resistance
(R1)
Shunt capacitance
(C0)
Load capacitance
(CL)
Drive Level
Aging @
25°C per year
Insulation
Resistance
Drive Level Dependency
(DLD,
Minimum
7 points tested:
from
1µW to
500µW)
0
-55
-50
-50
APPLICATIONS:
• Home electronics
• Computers, modems, and communications
• Automotive and industrial
• High-precision TCXO and clock applications
• Microprocessors
Typical
Maximum
70
24.0
70.00
50.00
+70
+125
+50
+50
See table 1 below
7
18
100
500
±10
25% of
Max
ESR
Max
ESR in
Table 1
1000
±5
ºC
ºC
ppm
ppm
Ω
pF
pF
µW
ppm
MΩ
ppm
Ω
Ω
MHz
Fundamental
AT-
cut
(Standard)
3
rd
OT
AT-cut
(Standard)
Fundamental
AT-
cut or
BT-cut (See
options)
See options
See options
See options
Units
Notes
See options
@
100Vdc
±
15V
Δfrequency
(Max –
Min)
ΔESR
(Max – Min)
Max
ESR over DLD
range
Table 1
Frequency (MHz)
3.579 - 4.999 (Fund.)
5.000
-
5.999
(Fund.)
6.000 -
7.999
(Fund.)
8.000
-
8.999
(Fund.)
9.000
-
9.999
(Fund.)
10.000
-
15.999
(Fund.)
16.000
-
50.000
(Fund.)
24.01
-
31.999
(3rd
O/T)
32.000 -
70.00
(3rd
O/T)
ABRACON IS
ISO 9001 / QS 9000
ISO 9001:2008
CERTIFIED
ESR(Ω) max.
180
120
100
80
60
50
40
100
80
Revised: 01.08.13
30332
Esperanza, Rancho Santa
Margarita,
California 92688
tel 949-546-8000
|
fax
949-546-8001
|
www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
HC/49US (AT49) MICROPROCESSOR CRYSTAL
ABL2 Series
OPTIONS AND PART IDENTIFICATION:
Pb
RoHS/RoHS II
11.5 x 5.0 x 2.5 mm
| | | | | | | | | | | | | | |
ABL2 -
Frequency in MHz
Please specify the frequency
in xx.xxxxMHz.
e.g. 14.3181MHz
Load Capacitance (pF)
Please specify CL
(Minimum 10pF) in pF or
S for series
Custom ESR if other
than standard
R□
□:
Specify a value in
Ω
(e.g.: R40)
MHz-
-
-
-
-
-
Packaging
Blank: Bulk
T: Tape & Reel
TRAY: Tray
Value Added
I
Insulator Tab
L2
Middle 3rd lead
QXX
Trimmed leads
Q15
for 0.15" length
Oscillation Mode
F: Fund. AT>24MHz
FB: Fund. BT>24MHz
Operating Temp.
A: -10°C ~ +60°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J*: -40°C ~ +105°C
K*: -40°C ~ +125°C
L*: -55°C ~ +125°C
Freq. Tolerance
H5: ± 5 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Freq. Stability
U**: ± 10 ppm
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
R: ± 150 ppm
NOTE:
* Frequency stability ±50ppm, ±100ppm, ±150ppm only. Contact ABRACON for tighter frequency stability.
** -10 to +60C only.
ABRACON IS
ISO 9001 / QS 9000
ISO 9001:2008
CERTIFIED
Revised: 01.08.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
HC/49US (AT49) MICROPROCESSOR CRYSTAL
ABL2 Series
OUTLINE DIMENSIONS:
Pb
RoHS/RoHS II
11.5 x 5.0 x 2.5 mm
| | | | | | | | | | | | | | |
ABL2 SERIES HC49/US (AT49)
MICROPROCESSOR CRYSTAL
Date of Issue: Jan. 2
nd
, 2013
Page (8) of (10)
8.0
Packaging:
L
5.5mm Min
20.0 ± 0.5mm
Packaging
Bulk
Tape & Reel
11.5 x 5.0 x 2.5 mm
Abracon Drawing # 450715
Revision #: K
T= Tape and reel (1,000pcs/reel)
Dimensions: inch (mm)
TAPE & REEL:
T= Tape and reel (1,000pcs/reel)
Dimensions: mm
ATTENTION:
Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO 9001 / QS 9000
ISO 9001:2008
CERTIFIED
Revised: 01.08.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
Speed sensorless technology and closed-loop high-performance control technology have been widely studied and applied in variable frequency speed regulation, and are a research hotspot for modern AC dr...
In the process of embedded development, we often encounter the situation that we need to edit various suffix files in IDE , but some files with suffixes may not be opened with the editor we want, so w...
[i=s]This post was last edited by elike on 2021-2-27 15:06[/i][Evaluation of SGP40]-SGP40 gas concentration cycle test
1 Experimental process and records
Using the solution prepared in the previous ex...
1. Selection of pull-up resistor for MCU You can see that when the resistor R1=10k in the reset circuit, RST is high level, and when R1=50, RST is low level. It is obvious that when R1=10k, it is wro...
Traditional sensing technologies have been used to solve challenging problems such as people counting, motion detection, industrial area scanning, and robotics to detect objects and avoid collisions.A...
[i=s]This post was last edited by qwqwqw2088 on 2019-2-15 11:42[/i] [size=4]With the rapid development of electric power technology, electronic equipment has become more sophisticated and high-end, an...
MILPITAS, CA – August 19, 2013 – Linear Technology Corporation introduces the LTM4624, a 14V, 4A step-down µModule® (micromodule) regulator. The device is available in a 6.25 x 6.25 x 5.01mm BGA pac...[Details]
When engineers train AI agents to play video games, they usually complete hours of human player play time in just a few minutes to stress test their performance. But when developing AI agents for the...[Details]
With the launch of Galaxy S22, Samsung has begun to focus on the camera functions of its mobile phones, allowing the mobile phones to take higher quality pictures through software algorithms. Current...[Details]
The traditional electronic system design method is compared with the modern electronic system design method, and the field programmable gate array (FPGA) circuit based on EDA technology is introduced...[Details]
The high-definition wave of video surveillance has not subsided, and it has risen again. Product planning needs to find reliable technical solutions to support it. Although the pure IP surveillance c...[Details]
Some knowledge about CPU timing: Oscillation period: The period of the oscillation source that provides timing signals for the microcontroller (crystal oscillator period or external oscillation perio...[Details]
On STM32F103 and other microcontrollers with cortex-m3/m4 cores, the interrupt vector table can be redefined by setting the value of the register SCB- VTOR = FLASH_BASE | VECT_TAB_OFFSET;. However, i...[Details]
1. Vector Interrupt Overview S5PC100 integrates three vector interrupt controllers (VIC in the following text), adopts PL192 core based on ARM PrimeCell technology, and also includes three TZICs, na...[Details]
If you ask which change brought by OTA version 4.1.0 has attracted the most attention, the switch of Ideal L9's audio system to self-developed sound effects will definitely rank high.
Wh...[Details]
1. Software Introduction
Mitsubishi PLC programming simulation software FX-TRN-BEG-C can realize simulation programming and animation simulation of FX series PLC without using physical PLC. Us...[Details]
In the past, people used to use multimeters for power supply testing, which was very troublesome if there were many test parameters. Now, oscilloscopes provide many automatic measurement functions, ...[Details]
By the end of 2019, the number of uninterrupted power supply operations exceeded 2,000 times, and the number of steps and duration for users to apply for power supply was reduced by nearly 1/3, sav...[Details]
1. Measure the polarity of each foot of the rectifier bridge Set the multimeter to R×1k, connect the black probe to any pin of the bridge stack, and use the red probe to measure the other three pins ...[Details]
In 2024, the organic light-emitting diode (OLED) TV series launched by LG Electronics won the favor of many authoritative American media and was unanimously rated as the top OLED TV product.
...[Details]