(5 ±1 seconds and charge/discharge not exceeding 50 mA)
0.1%
1,000 megohm microfarads or 100 GΩ
(Rated voltage applied for 120 ±5 seconds @ 25°C)
Parameters/Characteristics
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and Dissipation Factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 Vrms ±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50 Hz and 1.0 Vrms ±0.2 V if capacitance > 1,000 pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
I have seen similar millimeter wave human body sensing modules on Taobao before. The cheapest one is only a dozen yuan.
I didn't find any information about this XenD101 module, but I guess it won't be...
Abstract
Shortly after Arm, a global mobile computing IP giant, launched its new isolation technology TrustZone, the hacker community took the opportunity to launch its own attack against the architec...
I've been bored for too long, let me go out and get some fresh air.Some people have unconsciously stopped wearing masks.On the way back, we stopped by to enjoy the cherry blossoms....
Updated: December 24Development Platform Application Guide / BlueCoin Development Platform Sub-library:For more relevant resources, please visit the ST MEMS Device Resource Library: Click to enter...
Next are the 3 evaluation reports:
(1) https://en.eeworld.com/bbs/thread-1214040-1-1.html
(2) https://en.eeworld.com/bbs/thread-1214570-1-1.html
(3) https://en.eeworld.com/bbs/thread-1215784-1-1.htmlI...
As a new display media, LED display is a high-tech product integrating optoelectronics and computer technology. With the rapid development of large-scale integrated circuits and computer technolog...[Details]
Development environment: ubuntu arm-linux-gcc4.4.1 Development board: GEC210 development board Schematic I2C chip: FM24CL04 Connection with CPU, pins 0 and 1 of GPD1. Pin 0 corresponds to SDA...[Details]
Characteristics of weighing and measurement in the chemical industry: In some chemical and other industries, the weighing of materials such as tanks, containers, and hoppers often uses traditional me...[Details]
The microcontroller MCS-51 microcontroller has the addressing capability of 64K program memory and 64K data memory. Its data memory and I/O devices are uniformly addressed within the range of 64K. I...[Details]
The sudden outbreak of COVID-19 has hit the world, and the electronic information industry has inevitably been hit hard. As the global epidemic spreads and the world economy is severely impacted, Pre...[Details]
Code written in C: delay = 0x64; while(--delay); The compiled assembly source code is as follows: ; SOURCE LINE # 62 0010 7F64 MOV R7,#064H ; 2B,2CLK 0012 ?...[Details]
Temperature and Thermocouple Overview
Temperature is a measure of the average kinetic energy of particles in a sample of an object, and its standard unit is "degrees". Temperature can be m...[Details]
RTE1000 digital oscilloscope product introduction: R&S RTE digital oscilloscopes are available in 2-channel and 4-channel configurations, with bandwidths of 200MHz, 350MHz, 500MHz and 1GHz, sampling ...[Details]
The Semiconductor Industry Association (SIA) announced yesterday that AMD President and CEO Dr. Lisa Su is the 2020 recipient of SIA's highest honor, the Robert N. Noyce Award. SIA awards the Robert ...[Details]
How to connect DC motor to 8051 microcontroller? In this article, there are mainly two parts: 8051 microcontroller + DC motor system. First is the 8051 microcontroller with the necessary program to c...[Details]
1 Introduction Temperature control meters have been widely used in many fields such as industrial control. The intelligent temperature control meter with computer communication function introduced...[Details]
PIC timers are also used quite a lot. It is said that there are powerful software on the Internet to calculate the initial value, but I still calculate it manually. Summary————2013.8.27
PIC microco...[Details]
Finally, I made an oscilloscope based on STM32! I originally wanted to use an external high-speed AD to make an oscilloscope with a 1Mhz sampling rate. Since I had no experience in making oscilloscop...[Details]
I often see that many small companies use oscilloscopes that are too low-end, with low bandwidth and low sampling rate. They think that it is enough to capture the waveform, and they think that it ...[Details]
Earlier, vivo released a mobile phone called S1 in China. I thought it was exclusive to China, but I didn’t expect that it also has an Indian version. Foreign media Mysmartprice released a hardware c...[Details]