-
The kilowatt-class switching power supply made of PM4040F consists of a main circuit diagram and two different circuit diagrams for the output part. You can use the single-voltage part or the dual-...[Details]
-
The first step in using a temperature sensor is to correctly select the sensor type for the specific application. First, understand the target temperature that needs to be measured.
Detect PCB temp...[Details]
-
The minimum system of a single-chip microcomputer, or the smallest application system, refers to a system that can work with a single-chip microcomputer composed of the fewest components. For the 5...[Details]
-
In the single-chip microcomputer system, digital tube (LED) is a commonly used display. The general display is 4 or 8 bits, and there are many ways to achieve this display, which is also relati...[Details]
-
High voltage differential probes are used to measure the voltage difference between two test points that are not grounded. Tektronix's high voltage differential probes can be used for signals up to 6...[Details]
-
On April 30, 2021, SAE released the fourth edition of J3016 "Driving Automation Classification", which is another iterative update of J3016 after January 16, 2014, September 30, 2016, and June 15, 20...[Details]
-
Vishay Siliconix's S121j o -48V to +5V or +3.3V converter designed for ISDN applications. Its included integrated ungrounded feedback error amplifier provides direct output voltage regulation. This a...[Details]
-
SEMI said in its 200mm Fab Outlook Report that global semiconductor manufacturers are expected to increase 8-inch fab capacity by 1.2 million wafers, or 21%, to a record high of 6.9 million wafers pe...[Details]
-
1 Introduction
The switching power supply is a closed-loop automatic control system. The design of the control link of the switching power supply is an important part of its design. The common ...[Details]
-
1 引言
scale-2芯片组是专门为适应当今igbt与功率mosfet栅驱动器的功能需求而设计的。这些需求包括:可扩展的分离式开通与关断门级电流通路;功率半导体器件在关断时的输出电压可以为有源箝位提供支持;多电平变换器与并联功率器件的专业控制功能的兼容性;可以选择使用低成本的双向信号的变压器接口或抗电磁干扰光纤接口;可扩展设置,并具备故障管理;次级故障信号输入/输出,3.3...[Details]
-
0 Introduction
The multipoint control unit (MCU) of a video conference is the core device of a video conference system. All terminals participating in the conference can establish a one-to...[Details]
-
I still don't understand what the AHB bus, APB2 bus, and APB1 bus are in STM32 ? The so-called address mapping is to establish a one-to-one correspondence between the memory and even I/O resources...[Details]
-
Due to the needs of my classmates, I used the buzzer function of the 51 single-chip microcomputer to compose a song "My Motherland and I". The following is the complete code: #include reg52.h sbit...[Details]
-
In this lecture, I will talk about how to use the font extraction software to convert graphics into data. Many people have repeatedly asked me this question, so I will explain it in detail! There a...[Details]
-
Realme has announced a new hardware product launch event to be held later this month. The long-awaited smart TV and smartwatch are expected to be launched in India at the same time, as the reg...[Details]