POWER ENTRY MODULES
/ GERÄTESTECKER-KOMBIELEMENTE
Power entry modules
Types 6200/02/05, 6220
– Panel mount: – screw-on version, front or rear-side
– snap-in version, front-side
– Appliance inlet, fuseholder for fuses 5 x 20 mm,
1- and 2-pole
– Version with line filter/shield see page 95
6200/02/05, 6220
Types
6200, 6205
6200, 6205
Plug removal necessary
for fuse replacement
1-pole
50
75
100
Types
6220
6220
2-pole
Type
/ Typ
6202:
for protection class II
Characteristics
•
•
•
•
•
Available with or without internal connections
Plug removal necessary for fuse-link replacement
The fuseholder is accessible from the equipment front
Types 6200/6205 with spare fuse compartment
Qualified for use in equipment according to IEC/EN 60950
Technical data
Rated voltage
Rated current
Dielectric strength
(50 Hz, 1 Min.)
250 VAC
10 A
Types 6200/05 > 2 kV between L-N and
Types
6220
between L/N-PE
Type 6202
> 2 kV between L-N and
> 4 kV between L/N-PE
Allowable ambient air
temperatures T
a
–25 °C to +70 °C
Degree of protection (front side) IP 40 acc. to IEC 60529
Protection class
suitable for equipment with protection
class I and II acc. to IEC 61140
Terminals
Solder 3,5 x 0,8 mm or
quick-connect 4,8 x 0,8 mm or
quick-connect 6,3 x 0,8 mm, tin-plated
Panel thickness s
screw-on: max. 6 mm
snap-in: 1/1,5/2/2,5/3 mm
Materials: Housing
Thermoplastic, black, UL94 V-0
Appliance-inlet
acc. to IEC/EN 60320-1/C14,
protection class I, C18 protection class II
pin-temperature 70 °C (cold condition)
1- or 2-pole, shocksafe category PC2
acc. to IEC/EN 60127-6,
for fuse-links 5 x 20 mm
2 W (1-pole) 1,6 W (2-pole) per pole
see derating curves. Take note of
the information on page 197
Fuseholder
Rated power acceptance at
ambient air temp. T
a
23 °C
Admissible power acceptance
at higher T
a
Type
6220:
Patents in U.S. (No. 4, 959, 025) and in further countries
www.schurter.com
33
POWER ENTRY MODULES
/ GERÄTESTECKER-KOMBIELEMENTE
Dimensions Types 6200/02/05
Screw-on mounting
Snap-in mounting
6200/02/05, 6220
Panel cut-out
E:
solder terminals
E:
quick-connect terminals
Mounting screw torque 0,5 Nm
Dimensions Type 6220
Screw-on mounting
Snap-in mounting
20,5 mm
23,5 mm
0,5 Nm
E:
solder terminals
22,5 mm
E:
quick-connect terminals
25,5 mm
S: 1,0 / 1,5 / 2,0 / 2,5 / 3,0 mm
Panel cut-out
E:
solder terminals
E:
quick-connect terminals
Mounting screw torque 0,5 Nm
20,5 mm
23,5 mm
0,5 Nm
E:
solder terminals
E:
quick-connect terminals
S: 1,0 / 1,5 / 2,0 / 2,5 / 3,0 mm
Diagrams
2-pole
Admissible power acceptance in Watt
22,5 mm
25,5 mm
Derating curves for fuseholder
/ Derating-Kurven für G-Sicherungshalter
1-pole
Admissible power acceptance in Watt
6200/05
6220
per pole
with internal connections
Ambient air temperature T
a
°C
Ambient air temperature T
a
°C
Order Numbers
(socket and fuse drawer)
Types
/
Typen
Prot. class
/
Schutzklasse
Screw-on mounting
/ Schraubmontage
with internal
without internal
connections
/
connections
/
6200.2100
6200.2200
6200.2300
6205.2100
6205.2200
6205.2300
6202.2100
6202.2200
6202.2300
6220.2100
6220.2200
6220.2300
Types for rivet mounting on request. Therefore
change in the order No. the 5th digit from “2” to
“9” (e.g. 6220.9300)
Snap-in mounting
/ Schnappmontage
with internal
without internal
connections
/
connections
/
6200.41XX
6200.42XX
6200.43XX
6205.41XX
6205.42XX
6205.43XX
Terminals
solder
/
quick-connect
6200
I
6205
I
6202
II
6220
I
•
•
•
•
•
•
•
•
•
6220.51XX
6220.52XX
6220.53XX
“XX” panel thickness (s) in 1/10 mm. 10, 15,
20, 25, 30
(e.g. 6220.5210 for 1,0 mm)
•
•
•
Accessories see page 171
34
www.schurter.com