The action mode of the components (devices) in the circuit belongs to the circuit with linear change. Usually the emphasis is on the amplification factor, signal-to-noise ratio, operating frequency an...
The signal from the sensor is very weak, and the circuit behind it has been amplified and filtered. When the detection quantity remains unchanged, the amplified signal has certain fluctuations. Lookin...
1. What is the DSP power-on reset configuration? The DSP big-endian, little-endian, self-starting (boot) mode, PCIe mode, and network coprocessor clock selection need to be selected at power-on reset....
As shown in the figure: Multisim is used to simulate the voltage doubler rectifier circuit, with a transformation ratio of 20. According to the principle, if the voltage between C6 and the ground is t...
[size=4] The frequency characteristics of a network include amplitude-frequency characteristics and phase-frequency characteristics. When designing a system, the frequency characteristics of each netw...
[color=#333333][backcolor=rgb(245, 245, 244)][font="]When we design PCB, some of the principles we take for granted often go wrong. Electronic engineers also have such examples in circuit design.[/fon...