1/21/2018
Type 4X Polyester Junction Box (Solid and Clear Cover) (PJU Series) - Hammond Mfg.
Quality Products. Service Excellence.
Type 4X Polyester Junction Box (Solid and Clear Cover)
PJU Series
Lift-Off Cover with Screws
Application
Designed for use as instrument enclosures, electric, hydraulic or pneumatic control
housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or
be very wet.
Ideal in applications with high temperatures or highly corrosive environments.
Standards
UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
NEMA Type 1, 2, 3, 4, 4X, 12 and 13
IEC 60529, IP66
Construction
Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or
drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18" x 16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting.
Mounting hardware is included.
Cover fastened with captive stainless steel screws in threaded brass inserts.
Enclosure available with clear Polycarbonate cover to 16" x 14".
Captive oil resistant gasket provides a positive seal.
Available with Polycarbonate flange or foot mount brackets for multi-directional mounting.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information
section.
Finish
Fiberglass polyester material has a gray finish.
Optional inner panels are available in white powder coated finished steel or unfinished
aluminum, or Fiberglass.
Accessories
PJ/PJU/PCJ Replacement Hardware Kits
Swing Panels
Inner Panels
Terminal Kit Assemblies
https://www.hammfg.com/electrical/products/corrosion/pjuf
1/3