STM32H7A3xI/G
Datasheet
32-bit Arm
®
Cortex
®
-M7 280 MHz MCUs, up to 2-Mbyte Flash memory, 1.4
Mbyte RAM, 46 com. and analog interfaces, SMPS
Features
Includes ST state-of-the-art patented technology
LQFP64
(10 x 10 mm)
LQFP100
(14 x 14 mm)
LQFP144
(20x20 mm)
LQFP176
(24 x 24 mm)
FBGA
TFBGA100
(8 x 8 mm)
TFBGA216
(13x13 mm)
TFBGA225
(13x13 mm)
FBGA
Core
•
32-bit Arm
®
Cortex
®
-M7 core with double-precision FPU and L1 cache:
16 Kbytes of data and 16 Kbytes of instruction cache allowing to fill one cache
line in a single access from the 128-bit embedded Flash memory; frequency
up to 280 MHz, MPU, 599 DMIPS/ 2.14 DMIPS/MHz (Dhrystone 2.1), and DSP
instructions
UFBGA169
(7 x 7 mm)
UFBGA176+25
(10x10 mm)
WLCSP132
(4.57 X 4.37 mm)
Product summary
STM32H7A3RI,
STM32H7A3VI,
STM32H7A3QI,
STM32H7A3ZI,
STM32H7A3AI,
STM32H7A3II,
STM32H7A3NI,
STM32H7A3LI
STM32H7A3RG,
STM32H7A3VG,
STM32H7A3ZG,
STM32H7A3AG,
STM32H7A3IG,
STM32H7A3NG,
STM32H7A3LG
Memories
•
Up to 2 Mbytes of Flash memory with read while write support, plus 1 Kbyte of
OTP memory
•
~1.4 Mbytes of RAM: 192 Kbytes of TCM RAM (inc. 64 Kbytes of ITCM RAM +
128 Kbytes of DTCM RAM for time critical routines), 1.18 Mbytes of user SRAM,
and 4 Kbytes of SRAM in Backup domain
•
2x Octo-SPI memory interfaces, I/O multiplexing and support for serial PSRAM/
NOR, Hyper RAM/Flash frame formats, running up to 140 MHz in SRD mode
and up to 110 MHz in DTR mode
•
Flexible external memory controller with up to 32-bit data bus:
–
SRAM, PSRAM, NOR Flash memory clocked up to 125 MHz in
Synchronous mode
–
SDRAM/LPSDR SDRAM
–
8/16-bit NAND Flash memories
•
CRC calculation unit
Security
•
ROP, PC-ROP, active tamper, secure firmware upgrade support
General-purpose input/outputs
•
Up to 168 I/O ports with interrupt capability
–
Fast I/Os capable of up to 133 MHz
–
Up to 164 5-V-tolerant I/Os
Low-power consumption
•
Stop: down to 32 µA with full RAM retention
•
Standby: 2.8 µA (Backup SRAM OFF, RTC/LSE ON, PDR OFF)
•
V
BAT
: 0.8 µA (RTC and LSE ON)
Clock management
•
Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI
•
External oscillators: 4-50 MHz HSE, 32.768 kHz LSE
•
3× PLLs (1 for the system clock, 2 for kernel clocks) with fractional mode
STM32H7A3xI
STM32H7A3xG
DS13195
-
Rev 7
-
May 2021
For further information contact your local STMicroelectronics sales office.
www.st.com
STM32H7A3xI/G
Reset and power management
•
2 separate power domains, which can be independently clock gated to maximize
power efficiency:
CPU domain (CD) for Arm
®
Cortex
®
core and its peripherals, which can be
independently switched in Retention mode
–
Smart run domain (SRD) for reset and clock control, power management
and some peripherals
1.62 to 3.6 V application supply and I/Os
POR, PDR, PVD and BOR
Dedicated USB power embedding a 3.3 V internal regulator to supply the
internal PHYs
Dedicated SDMMC power supply
High power efficiency SMPS step-down converter regulator to directly supply
V
CORE
or an external circuitry
–
Embedded regulator (LDO) with configurable scalable output to supply the
digital circuitry
Voltage scaling in Run and Stop mode
Backup regulator (~0.9 V)
Low-power modes: Sleep, Stop and Standby
V
BAT
battery operating mode with charging capability
CPU and domain power state monitoring pins
•
•
•
•
•
•
•
•
•
•
•
Interconnect matrix
•
3 bus matrices (1 AXI and 2 AHB)
•
Bridges (5× AHB2APB, 3× AXI2AHB)
5 DMA controllers to unload the CPU
•
1× high-speed general-purpose master direct memory access controller
(MDMA)
•
2× dual-port DMAs with FIFO and request router capabilities
•
1× basic DMA with request router capabilities
•
1x basic DMA dedicated to DFSDM
Up to 35 communication peripherals
•
4× I2C FM+ interfaces (SMBus/PMBus)
•
5× USART/5x UARTs (ISO7816 interface, LIN, IrDA, modem control) and 1x
LPUART
•
6× SPIs, including 4 with muxed full-duplex I2S audio class accuracy via internal
audio PLL or external clock and 1 x SPI/I2S in LP domain (up to 125 MHz)
•
2x SAIs (serial audio interface)
•
SPDIFRX interface
•
SWPMI single-wire protocol master interface
•
MDIO Slave interface
•
2× SD/SDIO/MMC interfaces (up to 133 MHz)
•
2× CAN controllers: 2 with CAN FD, 1 with time-triggered CAN (TT-CAN)
•
1× USB OTG interfaces (1HS/FS)
•
HDMI-CEC
•
8- to 14-bit camera interface up to 80 MHz
•
8-/16-bit parallel synchronous data input/output slave interface (PSSI)
DS13195
-
Rev 7
page 2/230
STM32H7A3xI/G
11 analog peripherals
•
2× ADCs with 16-bit max. resolution (up to 24 channels, up to 3.6 MSPS)
•
1× analog and 1x digital temperature sensors
•
1× 12-bit single-channel DAC (in SRD domain) + 1× 12-bit dual-channel DAC
•
2× ultra-low-power comparators
•
2× operational amplifiers (8 MHz bandwidth)
•
2× digital filters for sigma delta modulator (DFSDM), 1x with 8 channels/8 filters
and 1x in SRD domain with 2 channels/1 filter
Graphics
•
LCD-TFT controller up to XGA resolution
•
Chrom-ART graphical hardware Accelerator (DMA2D) to reduce CPU load
•
Hardware JPEG Codec
•
Chrom-GRC
™
(GFXMMU)
Up to 19 timers and 2 watchdogs
•
2× 32-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature
(incremental) encoder input (up to 280 MHz)
•
2× 16-bit advanced motor control timers (up to 280 MHz)
•
10× 16-bit general-purpose timers (up to 280 MHz)
•
3× 16-bit low-power timers (up to 280 MHz)
•
2× watchdogs (independent and window)
•
1× SysTick timer
•
RTC with sub-second accuracy and hardware calendar
Debug mode
•
SWD and JTAG interfaces
•
4 KB Embedded Trace Buffer
1x 32-bit, NIST SP 800-90B compliant, true random generator
96-bit unique ID
All packages are ECOPACK2 compliant
DS13195
-
Rev 7
page 3/230
STM32H7A3xI/G
Introduction
1
Introduction
This datasheet provides the ordering information and mechanical device characteristics of the STM32H7A3xI/G
microcontrollers.
This document should be read in conjunction with the STM32H7A3xI/G reference manual (RM0455). The
reference manual is available from the STMicroelectronics website .
For information on the device errata with respect to the datasheet and reference manual, refer to the
STM32H7A3xI/G errata sheet (ES0478), available on the STMicroelectronics website .
For information on the Arm
®
Cortex
®
-M7 core, refer to the Cortex
®
-M7 Technical Reference Manual, available
from the www.arm.com website
Note:
Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
DS13195
-
Rev 7
page 4/230
STM32H7A3xI/G
Description
2
Description
STM32H7A3xI/G devices are based on the high-performance Arm
®
Cortex
®
-M7 32-bit RISC core operating at
up to 280 MHz. The Cortex
®
-M7 core features a floating point unit (FPU) which supports Arm
®
double-precision
(IEEE 754 compliant) and single-precision data-processing instructions and data types. STM32H7A3xI/G devices
support a full set of DSP instructions and a memory protection unit (MPU) to enhance application security.
STM32H7A3xI/G devices incorporate high-speed embedded memories with a dual-bank Flash memory of up
to 2 Mbytes, around 1.4 Mbyte of RAM (including 192 Kbytes of TCM RAM, 1.18 Mbytes of user SRAM and
4 Kbytes of backup SRAM), as well as an extensive range of enhanced I/Os and peripherals connected to four
APB buses, three AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal
and external memory access.
All the devices offer two ADCs, two DACs (one dual and one single DAC), two ultra-low power comparators, a
low-power RTC, 12 general-purpose 16-bit timers, two PWM timers for motor control, three low-power timers, a
true random number generator (RNG). The devices support nine digital filters for external sigma delta modulators
(DFSDM). They also feature standard and advanced communication interfaces.
•
Standard peripherals
–
–
–
Four I2Cs
Five USARTs, five UARTs and one LPUART
•
Six SPIs, four I2Ss in full-duplex mode. To achieve audio class accuracy, the I
2
S peripherals can be
clocked via a dedicated internal audio PLL or via an external clock to allow synchronization.
–
Two SAI serial audio interfaces, out of which one with PDM
–
One SPDIFRX interface
–
One single wire protocol master interface (SWPMI)
–
One 16-bit parallel synchronous slave interface (PSSI) sharing the same interface as the digital
camera)
–
Management Data Input/Output (MDIO) slaves
–
Two SDMMC interfaces (one can be supplied from a supply voltage separate from that of all other I/Os)
–
A USB OTG high-speed with full-speed capability (with the ULPI)
–
One FDCAN plus one TT-CAN interface
–
Chrom-ART Accelerator
–
HDMI-CEC
Advanced peripherals including
–
–
–
–
–
–
A flexible memory control (FMC) interface
Two octo-SPI memory interface
A digital camera interface for CMOS sensors (DCMI)
A graphic memory management unit (GFXMMU)
An LCD-TFT display controller (LTDC)
A JPEG hardware compressor/decompressor
Refer to
Table 1. STM32H7A3xI/G features and peripheral counts
for the list of peripherals available on each part
number.
STM32H7A3xI/G devices operate in the –40 to +85 °C ambient temperature range from a 1.62 to 3.6 V
power supply. The supply voltage can drop down to 1.62 V by using an external power supervisor (see
Section 3.5.2 Power supply supervisor)
and connecting the PDR_ON pin to V
SS
. Otherwise the supply voltage
must stay above 1.71 V with the embedded power voltage detector enabled.
The USB OTG_HS/FS interfaces can be supplied either by the integrated USB regulator or through a separate
supply input.
A dedicated supply input is available for one of the SDMMC interface for package with more than 100 pins. It
allows running from a different voltage level than all other I/Os.
A comprehensive set of power-saving mode allows the design of low-power applications.
The CPU and domain states can be directly monitored on some GPIOs configured as alternate functions.
STM32H7A3xI/G devices are offers in several packages ranging from 64 pins to 225 pins/balls. The set of
included peripherals changes with the device chosen.
These features make the STM32H7A3xI/G microcontrollers suitable for a wide range of applications:
DS13195
-
Rev 7
page 5/230
京公网安备 11010802033920号
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
EEWORLD
