Resistor-capacitance spark elimination circuit a
Source: InternetPublisher:桂花蒸 Keywords: Resistance and capacitance BSP Updated: 2020/06/28
It is a resistance-capacitance spark elimination circuit. It converts the magnetic energy in the coil into the electrical energy of the capacitor C, thereby achieving
the purpose of eliminating sparks, and the effect of eliminating sparks is good. When the polarity of the power supply is reversed, the circuit can still work normally.
Usually r takes 50~100f2, and C takes 0.1~2VF. Can be determined by testing.
- Working principle of one Xipu STR soft starter controlling two motors
- Motor self-starting circuit
- Simple phase failure protection circuit composed of intermediate relay
- Design and analysis of voice control circuit
- Do-it-yourself trial production of phase failure protection device
- Design and production of no-load automatic power-off device for household power supply
- Homemade anti-theft watchdog
- Car audio system anti-theft circuit
- Automatic power off switch when power outage occurs
- Refrigerator Thermostat Replacement Device
- Greenhouse temperature control circuit
- Farmland drainage automatic control circuit
- Mixer built with analog multipliers
- Diode Balanced Mixer Circuit
- Proportional frequency discriminator circuit
- collector amplitude modulation circuit
- Inductive feedback oscillator circuit
- Double gate field effect transistor high frequency amplifier circuit
- Voltage series negative feedback amplifier circuit
- Second-order active band-stop filter circuit