Multi-core cable breakage detector circuit
Source: InternetPublisher:aytwartoofyoroo Keywords: Detector cable BSP Updated: 2021/06/04
Shown is a multi-core cable breakage detector circuit. This circuit can check multiple wires at the same time to quickly and accurately detect
whether and which wire is broken in the cable
- especially suitable for telecommunications maintenance personnel.
The circuit is mainly composed of a self-excited oscillator (composed of a capacitor
cl, a resistor and transistors VTI and
VT2), a pulse distributor CD4017 and
an indication circuit . When in use, one end of the cable to be tested should
be grounded, and the multi-strand wire ends at the other end should be connected to the YO~Y9 output terminals of the detector
respectively
. After the pulse signal output by the self-oscillator
is processed by CD4017, a high level is output from its YO-Y9
to provide operating
voltage for the light-emitting diode. When the wire under test is intact,
the positive and negative electrodes of the light-emitting diodes are at the same potential ( the resistance of the cable is very small), and LED1 to LED10 do not light up. If a wire is broken, one end of the light-emitting
diode will be The current resistor is connected to high potential and the other end is connected to ground, so the corresponding light-emitting diode is lit, so that all the wires can be
inspected quickly.
- IRS2530D electronic ballast circuit diagram
- Six LED stereo VU display circuit built with IC LM3915
- Use MC1455PIG to make automatic cycle light-emitting diode circuit
- Electronic massage and acupuncture device circuit
- Resistor value selection circuit
- Simple electronic doorbell circuit
- WT8089 holiday lights ASIC
- Digital display multi-function thermometer circuit
- Three-way music lantern circuit
- Automotive LED driver circuit diagram using LT3486
- strain sensor
- Excellent performance household inverter power supply circuit
- Smoking Cessation Circuit
- Homemade disinfectant circuit
- Fish farming thermostatic control circuit
- Biogas concentration detection line
- Audio function generator composed of ICL8038
- Schiller oscillator circuit
- OTL low frequency power amplifier circuit
- Voltage-controlled voltage source second-order active low-pass filter circuit