Closed loop position servo application circuit
Source: InternetPublisher:念慈菴 Keywords: Application circuit power supply BSP Updated: 2021/05/14
(1) Application in position servo: As shown in Figure 2-26, the control power supply is ±15V.
The driver stage power supply is ±22V. Connect an external H-bridge transistor switch to expand the output current. The motor
drives a potentiometer through gear transmission as actual position detection, and the feedback voltage
is introduced from pin 3. The position command voltage signal is input from pin 4. Use six resistors to divide the voltage to obtain
the peak voltage and threshold voltage of the triangular wave.
Latest Control Circuits Circuits
- Design and selection of electric control valve system drive
- How to choose the right level of integration to meet motor design requirements?
- A small improvement on the ordinary refrigerator motor starting circuit
- Manual automatic air compressor control circuit
- Simple phase failure protection circuit composed of intermediate relay
- One-way rotation circuit of motor controlled by contactor
- Light-controlled circuit design and analysis
- Temperature control circuit design and analysis
- Guanghua brand anti-theft doorbell electronic lock circuit
- Infrared detection alarm
Popular Circuits
- Motor forward and reverse control wiring diagram (2)
- stuttering correction circuit
- Rural vegetable greenhouse lighting circuit
- Poultry warming temperature control circuit
- DC ammeter
- Audio function generator composed of ICL8038
- Parallel crystal oscillator
- Inductive feedback oscillator circuit
- color discrimination circuit
- Three primary color display circuit
京公网安备 11010802033920号