H-bridge drive circuit composed of Smart SIPMOS
Source: InternetPublisher:难得正经 Keywords: MOS SIP driver circuit Updated: 2021/04/26
Using two BTS412B as high-side switches and two BU271L power MOSFETs
(50v, 䉉1n) as low-side switches, an H-bridge bidirectional DC motor drive circuit can be formed ,
as shown in Figure 11-1l. This circuit is designed for an electrical automatic door with a continuous current of 6A.
The four-leg switch is directly controlled by C MOS logic levels. The two BTS412B status outputs
are driven by a transistor with OR logic and an LED indicates the fault status. The middle point of the left bridge arm
is connected to a 12ktl resistor to the ground so that when all four switches of the H-bridge are turned off, the BTS412B will not
mistake it for an open load. Once a load open circuit occurs, the BTS412B on the right can detect
it and send a fault signal.
- Working principle of one Xipu STR soft starter controlling two motors
- Motor self-starting circuit
- Motor control circuit for starting and running without phase loss
- Using P110C to control 6 DC motors simultaneously
- Design and analysis of touch delay switch circuit composed of CD4011 and CD4001
- Design and analysis of a four-bit remote control component capable of remote reset
- Electric vehicle battery charging protection circuit
- Magnetic door and window anti-theft alarm
- Home wireless burglar alarm circuit
- Range hood automatic controller
- 13 examples of electric drag control circuit diagram
- Rural fish farming control circuit
- Multi-channel patrol detection control circuit a
- Photocell amplification control circuit
- Table printing machine control circuit
- C-MOS inverter and its internal structure
- Fully symmetrical MOS FET 100W hi-fi amplifier 01
- MOS inverter circuit
- MOS-FET switch pulse output circuit diagram
- TTL to MOS driver