PCB chip display

Elecpig

PCB chip display [Copy link]

Draw the PCB diagram in AD15 and map the schematic diagram to the PCB diagram. I found that the chip pins in the PCB are as shown in the figure above. The figure below is an enlarged display of the above figure, which shows that there are many wrong numbers on the pins: Is this normal, or is there something wrong?

bioger

Implement the rules and check them to find out what the problem is, then modify the rules according to the problem.

PCB我不会

The distance between pins and pins and the silk screen is smaller than the specified distance. You can change the specified distance or ignore it.

JLCS

Thank you for sharing! ! ~~ Jiali Chuang proofing contact QQ800058652