How to determine the direction of the connector below

呜呼哀哉

How to determine the direction of the connector below [Copy link]

As shown in the figure below, is this connector called a board-to-board connector?

How do you determine the orientation of this connector? It looks symmetrical no matter how you look at it.

qwqwqw2088

qwqwqw2088

However, when using it on a PCB, the serial number must still be indicated on the drawing. However, when assembling this board-to-board connector, it can be installed in any direction.

The PCB package library displayed still has a serial number because it must correspond to the schematic diagram

呜呼哀哉

qwqwqw2088 posted on 2024-6-19 14:48 However, when used on PCB, the serial number should still be indicated on the drawing. However, when assembling this board-to-board connector, it can be installed in any direction on the P shown...

Thank you, it is true. For board-to-board connection, the direction is determined by the relative position of the boards.

秦天qintian0303

There are many types of board-to-board connectors, which are basically anti-reverse. In addition to DuPont wires, the common PH/XH sockets cannot be reversed and are particularly difficult to weld. They are generally used in screen interfaces.

wangerxian

The screen I played with before had this kind of interface, and it is indeed possible to connect it incorrectly.