Free application evaluation: ST NUCLEO-C031C6 development board

eric_wang

Free application evaluation: ST NUCLEO-C031C6 development board [Copy link]

 

NUCLEO-C031C6 is one of the low-cost MCU series launched by STMicroelectronics. The board is ideal for rapid prototyping, and its standardized connections allow designers to build and reuse additional hardware across the entire Nucleo board portfolio. NUCLEO-C031C6 provides Arduino-compatible connectors, and the standardized ST connector (Morpho) provides access to all available IOs on the MCU.

The STM NUCLEO-C031C6 Nucleo development board includes ready-to-use software examples and is supported by IAR and Keil development tools and GCC-based IDEs. The NUCLEO-C031C6 features an ST-LINK/V2-1 in-circuit debugger and programmer and can be used with the onboard MCU or in standalone mode with any other application containing an STM32 MCU.

characteristic

• ARM 32-bit Cortex-M0+ CPU, core frequency up to 48MHz

• Memory

  • 32Kb flash memory with protection

  • 12Kb SRAM with HW parity

• CRC calculation unit

• Reset and Power Management

  • Voltage range: 2.0V to 3.6V

  • Power-On/Power-Off Reset (POR/PDR)

  • Programmable Brown-out Reset (BOR)

  • Low power modes including sleep, stop, standby and off

• Clock Management

  • 4MHz to 48MHz crystal oscillator

  • 32kHz crystal oscillator with calibration function

  • Internal 48MHz RC oscillator (±1%)

  • Internal 32kHz RC oscillator (±5%)

• Up to 45 fast I/Os

  • All mappable on external interrupt vectors

  • Multiple 5V tolerant I/Os

• Operating temperature: -40°C to +85°C/+105°C/+125°C

• 3-channel DMA controller with flexible mapping

• 12-bit 0.4s ADC (up to 19 external channels)

  • Conversion range: 0V to 3.6V

• 8 16-bit timers for advanced motor control, 4 16-bit general purpose timers, 2 watchdog timers

• Calendar RTC with alarm

• Communication Interface

  • 1 I2C-bus interface supporting Fast-mode+ (1Mb/s) with extra current sink, SMBus/PMBus support, and wake-up from Stop mode

  • 2 USARTs with master/slave synchronous SPI; 1 supports ISO7816 interface, LIN, IrDA function, automatic baud rate detection and wake-up function

  • 1 SPI (24Mb/s) with 4 to 16-bit programmable bit frame and I2S interface multiplexing

• Serial Wire Debug (SWD) Development Support

• All packages comply with ECOPACK 2 standard

how to apply

---

>>Click I want to apply , fill in the reason for application, assessment plan, etc., and you will have the opportunity to get a free assessment opportunity.

Event Schedule

---

Application period: December 21, 2023 to January 10, 2024

Selection announcement: All shortlisted candidates will be announced before January 17

Evaluation period: January 20th - March 10th

Award time: within two weeks after the evaluation

Assessment requirements

---

After receiving the development board, please publish your own evaluation report on EEWorld STM32/STM8 with your own title. Submit at least one evaluation report per week. The evaluation report must be 100% original and first published. Plagiarism will be banned.

The evaluation report may include:
1. Unboxing evaluation (evaluation from the aspects of functional characteristics, system block diagram, hardware resources, workmanship, software resources, functional demonstration, etc.);
2. The test process, results, and experience summary of each functional module/Demo; problems encountered during the development process and solutions explored;
3. Serialization
of the learning/entry process; 4. The process of completing a small production, experience sharing, key code analysis, etc.;
5. Evaluation summary and suggestions for manufacturers, etc.

>>Click here to view detailed evaluation rules

Event Awards

---

All netizens who participated in the evaluation will be scored after the activity ends. The comprehensive evaluation score = 70% evaluation report quality + 10% evaluation plan completion + 10% evaluation interaction + 10% evaluation timeliness.

EEWorld Community Points Reward Rules:

Comprehensive evaluation score	award
Comprehensive evaluation score>=90 points	One evaluation invitation ticket + reserved evaluation development board + 20 prestige + 20 core points
Comprehensive evaluation score>=75 points	Keep the evaluation development board +10 prestige +10 core points
Comprehensive evaluation score <75 points	Send back the evaluation board

Product information

Related user manuals, schematics, main chip data sheets, software resource packages, related tutorials, etc. can be downloaded here .

For more free development board reviews, >>please follow EEWorld Review Center .

mazhenhang

Newcomers earn points, newcomers earn points, newcomers earn points,