The second question about using Altium Designer 19 (I have always used PADS, please let me know if you know, thank you. I don't want to say...

QWE4562009

The second question about using Altium Designer 19 (I have always used PADS, please let me know if you know, thank you. I don't want to say... [Copy link]

The second of several questions about using Altium Designer19 (I have been using PADS, if you know, please let me know, thank you. If you don’t want to tell me, please go by the way)

1. If you want to modify the pad size and other parameters of a package in AD19 PCB, right click does not edit? Can I only find this component in the package library and then edit it?

2. How to remove the dots on the AD19 PCB routing?

3. AD19 screw hole package via and through-hole pad combination package, this is a whole. Why does the via separate from the pad when moving, which wrong operation will cause this situation

? 4. When AD19 is pulling the wire, the grid line looks pleasing to the eye, not solid line. Why is it solid line when drawing? It is solid line after drawing

5. How to remove the yellow frame when converting AD19 schematic to PDF?

6. Both layers can be used as board frame layers? Which layer is better to use

? 7. There is an × on the via, which is wrong in the setting?

8. AD19 layer settings

Uploading one by one is too slow. It is faster to compress it directly. You can also download it directly in one package. . .
AD19使用问题点20230704.rar (1.13 MB, downloads: 0)

2023-7-4 16:04 上传

点击文件名下载附件

scxuchenglong

1. Double click to edit directly. 2. Delete by selecting. 3. Ad seems to be separated and can be moved. 4. It should be configurable. 5. I don't know. 6. It is usually mechanical 1

led2015

1. If you want to modify the pad size and other parameters of the component package in the AD19 PCB, the right-click menu may not have a direct editing option. You can open the package library, find the package of the component, and edit it or create a custom package.

2. To remove the routing points on the AD19 PCB, you can use the delete or eliminate function provided by the software. Usually, you can select a specific routing point and perform a delete operation, or use the eliminate function to automatically remove redundant routing points.

3. In the AD19 PCB, if the vias and pads are out of alignment, this may be due to mishandling. For example, when you move the component, you may not align it completely with the pad, causing the via to be out of alignment. Please make sure to align the components carefully to avoid this.

4. In AD19, when drawing lines, the default display is grid lines instead of solid lines. After drawing the lines, you can set them to solid lines to improve the visual effect. The specific setting method may vary depending on the software version. You can try to find the relevant display options or shortcut keys in the software's line drawing state.

5. If a yellow box appears after converting the AD19 schematic to PDF, this may be due to the default settings of the software. You can try to adjust the relevant drawing or printing settings in the software before exporting to PDF to remove the yellow box.

6. In AD19, there are usually multiple layers that can be used as board frame layers. You can use the top or bottom layer as the board frame layer to draw and define the overall board frame shape in your design. Which layer to choose as the board frame layer is mainly determined by the needs of the design and personal preference.

lsfjing

It is not recommended to use AD19, just use AD10, which has fewer bugs; or change to PADS and CADENCE