Homemade Experimental Board

ayld

Homemade Experimental Board [Copy link]

I sell chips and components myself. Is it difficult to solder an experimental board on a perfboard from simple to complex step by step?

lugl4313820

Is it difficult to sell ( buy ) chips and components by yourself, and solder an experimental board on a perfboard step by step from simple to complex?

It's not difficult, here are some suggestions:

1. Choose components with pins for insertion, but it seems that some MCU packages in the catalog rarely have pins for insertion. If that doesn't work, you have to buy an adapter board.

2. Welders must be skilled.

3. The schematic diagram should be drawn well. It is best to verify it with a universal board after simulation, and then implement it with a perforated board.

If you really succeed, the benefits will be much greater than buying a ready-made development board. I wish you success soon!

dcexpert

You can definitely DIY it yourself. The minimum system plus appropriate peripheral circuits will also be of great help to your learning.

damiaa

Never mind. Let's get started.

秦天qintian0303

It is recommended to use enameled wire

秦天qintian0303

After fixing the device to the perforated board, it is very convenient to connect it with flying wires.

476700838

Without the corresponding process quality assurance, it is difficult to produce precise electronic instruments even with the best design drawings.

wangerxian

It’s not difficult, but it takes a long time.

chunyang

Practice more, it won't be difficult once you get the hang of it. If you want to learn, the most effective way is to practice more, no matter how difficult it is.

ayld

Thank you. I also want to learn every step well.

freebsder

It depends on what you want to do, the ordinary 51 single-chip microcomputer system is completely fine.