200ppi to Ethernet via 4Gwifi on medical device mobile platforms (tablets, mobile phones)

兴达易控

200ppi to Ethernet via 4Gwifi on medical device mobile platforms (tablets, mobile phones) [Copy link]

summary

The MPI/PPI port of Siemens S7-200PLC is used on site, and Xingda Easy Control PPI-ETH-XD1.0 Ethernet communication module expands a network port for upper communication.

Network diagram

1. Install a Siemens dedicated communication gateway adapter module on each PLC to expand a network port for communication with mySCADA;
2. Install a WIFI router on site, connect each PLC to the router through a network cable, and connect the IPAD to the router through the WIFI network, so that the IPAD and PLC can communicate.
3. Install the mySCADA APP on the IPAD, download the customized project to the APP and run it to achieve the purpose of using the IPAD to wirelessly monitor the PLC;
install an industrial-grade router in the pharmaceutical workshop, use a shielded network cable, plug the network port expanded by the CHNet module into the router, and keep a certain interference distance between the router and the production motor.
The IPAD should maintain a smooth wireless network connection (otherwise the monitoring data display will be unstable).
2. Client monitoring
The client can directly open the mySCADA APP application on the IPAD and directly enter the monitoring system for monitoring.

Project implementation results display
The following is a partial screen display of project access through the APP. Real-time monitoring of pharmaceutical equipment is achieved.

Main Screen

Parameter setting page

lugl4313820

A company that can use Siemens must be a big company with plenty of money.