Why does the STACK MODE of almost all pads in ALTIUM DESIGNER change to FULL STACK?

littleshrimp

Why does the STACK MODE of almost all pads in ALTIUM DESIGNER change to FULL STACK? [Copy link]

It used to work fine before, but I don't know since when, all the multi-layer pads in the PCB library became FULL STACK, resulting in a pad on the top layer and a hole on the bottom layer.

I checked online and found that other people have encountered this situation, but the reason is unknown.

dcexpert

It should be a configuration problem. AD can be made into a green version, and it can be restored at any time if there is a problem.

qwqwqw2088

Is it made into a sample, or is it shown in 3D?

Is there any error in producing gerber files?

littleshrimp

qwqwqw2088 posted on 2021-10-3 21:14 Is it made into a sample, or is the 3D display like this to produce the gerber file? Is there anything wrong with it?

Gerber is also made in this way. There is no pad on the back of the board, and there is copper in the through hole.