Vayo-CAM365 Function Detailed Explanation (I)

vayo123

Vayo-CAM365 Function Detailed Explanation (I) [Copy link]

1. Data source support: Vayo-CAM365 software supports the following types of data:

(1) Gerber (RS-274-X; RS-274-D)

(2) Drill

(3) DXF

(4) PCB CAD (IPC-2581; ODB++)

(5) XY coordinate document

Figure 1. Data import

Figure 2. Software automatically recognizes Gerber data

Figure 3. Software automatically identifies ODB++/IPC-2581 data

2. Search by bit number. The operation steps are as follows:

(1) Import Gerber, as shown in Figure 4;

(2) Import the XY coordinate file, click the "Identify Field" in the upper left corner, and click "OK" in the lower left corner, as shown in Figure 5;

(3) Click the "Find" tool button on the toolbar to pop up the search dialog box, as shown in Figure 6. (Note: IPC2581 and ODB++ data can be directly queried after being read in)

Figure 4. Importing Gerber

Figure 5. Importing XY coordinates

Figure 6. Bit number search

3. Coordinate system setting, the operation steps are as follows:

(1) Import Gerber and XY coordinates;

(2) Click the "Create Origin" tool button on the toolbar to freely set the origin, and freely create the origin in the following dialog box;

Figure 7

Figure 8

(3) Move the cursor to the optical drawing area and right-click, select "Locate..." , enter the value in the following interface, and click "Go to" to move the origin along the X and Y axis according to the set value .

Fig. 9

Fig.10

qwqwqw2088

What new features does CAM365 software have over 350?

Is there a green version? Please send me one.