Some expansion module products of Raspberry Pi PICO

Jacktang

Some expansion module products of Raspberry Pi PICO [Copy link]

 

Pico Explorer Base - Pimoroni's product

特性
Pico Explorer Base
Piezo speaker
1.54" IPS LCD screen (240 x 240)
Four user-controllable switches
Two Half-Bridge motor drivers (with over current indicator LED)
Easy access GPIO and ADC pin Headers
Two Breakout Garden I2C sockets
Mini breadboard
Rubber feet
Compatible with Raspberry Pi Pico.
No soldering required (as long as your Pico has header pins attached).
Dimensions: approx 117mm x 63mm x 20mm (L x W x H, assembled)
C/C++ and MicroPython libraries

Pico RGB Keypad Base

特性
4x4 silicone keypad with conductive buttons
16 x APA102 addressable RGB LEDs (datasheet)
Keypad buttons are connected via a TCA9555 IO expander (I2C address: 0x20).
Labelled landing area with female headers for attaching your Pico, with broken out pins.
Compatible with Raspberry Pi Pico.
Some assembly required!
No soldering required (as long as your Pico has header pins attached).
Dimensions: approx 60mm x 101mm x 16mm (L x W x H, assembled)
C/C++ and MicroPython libraries
管脚连接

Pico Unicorn Pack

特性
16x7 matrix of RGB LEDs (112 total)
Individual colour/brightness control of each LED
4 x tactile buttons
Pre-soldered female headers for attaching to Pico
Compatible with Raspberry Pi Pico.
Fully assembled
No soldering required (as long as your Pico has header pins attached).
Dimensions: approx 62mm x 25mm x 10mm (L x W x H, including headers and buttons)
C/C++ and MicroPython libraries
管脚连接

Jacktang

littleshrimp

This peripheral installation method looks pretty cool

1nnocent

This extended version feels like you can DIY it yourself