2711 views|7 replies

305

Posts

0

Resources
The OP
 

【NUCLEO-L552ZE Review】-3: Arduino vs. Mbed? [Copy link]

This post was last edited by MianQi on 2021-1-9 10:03

The NUCLEO-L552ZE package brochure mentions that there is an Arduino UNO v3 interface and an Mbed interface in the Zio port. After checking, the Arduino interface is not available yet. There is an account "STM32duino" in github, which has not yet collected the L552 series chips. Looking at the Visual Studio Code plug-in PlatformIO that I used before, it supports more than 900 boards, but NUCLEO-L552ZE is not supported in the Mbed framework. So, if you want to test it, you can only look at Mbed's own OS. Mbed puts itself on a par with Arduino UNO, and takes the lead in adding its own support to ST's new models, although this is not mentioned in the text introduction found online.

First, install Mbed Studio:

After installation, open (you need to have a registered account on the Mbed website):

Plug in the board and it will be recognized:

Start a new project:

Compile (the "hammer" in the middle left of the picture below):

Run (that is, upload - "Play" to the right of "Hammer"):

Running effect: https://v.youku.com/v_show/id_XNTA1MTU0NjU0NA==.html

This post is from stm32/stm8

Latest reply

Is mbed something that ARM itself developed? Does it still have a sense of crisis? I don't understand   Details Published on 2021-1-13 22:59

赞赏

1

查看全部赞赏

 

1942

Posts

2

Resources
2
 

I haven't used this method yet, I hope to see detailed usage instructions! ! !

This post is from stm32/stm8
 
 

305

Posts

0

Resources
3
 

The usage of Mbed is similar to Arduino, but it requires an online state. First, go to its website to download and install Mbed Studio. You must register on the website before downloading (perhaps Mbed is in a state of crisis after ARM acquired Keil). Once Mbed Studio is installed, the board will be recognized when it is plugged in. Examples are included in Mbed Studio. The remaining steps are just Build and Run. The reason why there is no more detailed explanation is that it is just a few simple steps, and there is no more complicated operation to point out.

This post is from stm32/stm8
 
Personal signature

“Everyone wants the project to be good, fast, and cheap... pick two.”

- Unknown

 

6062

Posts

4

Resources
4
 

Thanks for sharing!!! I haven't touched mbed for a long time. It seems I need to play with it.

This post is from stm32/stm8

Comments

Mbed is worth paying attention to, and it is a brand under ARM and should not be underestimated.  Details Published on 2021-1-12 11:23
 
 
 

305

Posts

0

Resources
5
 
damiaa posted on 2021-1-12 09:39 Thanks for sharing!!! I haven't touched mbed for a long time. It seems I need to play with it.

Mbed is worth paying attention to, and it is a brand under ARM and should not be underestimated.

This post is from stm32/stm8
 
Personal signature

“Everyone wants the project to be good, fast, and cheap... pick two.”

- Unknown

 
 

6062

Posts

4

Resources
6
 
MianQi posted on 2021-1-12 11:23 Mbed is worth paying attention to. It is a brand under ARM and should not be underestimated.

Yes. It is really good to use mbed to play C++.

This post is from stm32/stm8
 
 
 

7422

Posts

2

Resources
7
 

Is mbed something that ARM itself developed? Does it still have a sense of crisis? I don't understand

This post is from stm32/stm8
 
Personal signature

默认摸鱼,再摸鱼。2022、9、28

 
 

305

Posts

0

Resources
8
 

Keil's acquisition by ARM shows that ARM is not satisfied with Mbed. In addition, apart from being free, Mbed is redundant compared to Keil in terms of functionality.

This post is from stm32/stm8
 
Personal signature

“Everyone wants the project to be good, fast, and cheap... pick two.”

- Unknown

 
 

Just looking around
Find a datasheet?

EEWorld Datasheet Technical Support

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号
快速回复 返回顶部 Return list