[Gizwits Gokit3 Review] + AirLink configuration (Arduino)

跋扈洋

[Gizwits Gokit3 Review] + AirLink configuration (Arduino) [Copy link]

 

We all know that projects that are not connected to the Internet often no longer exist in today's smart home industry, so we must first configure the network for the development board.

The specific process is as follows

1. Create a new product
   
   and fill in the relevant types. You can fill them out according to your needs.
   

2. Add data points
   
   here and set the data points according to your own needs, which is equivalent to every element you want to control or use.

3. Generate MCU code
   
   Download the code compressed package you generated.

4. Integration code
   Copy all the files in your Gizwits except examples and paste them into the two folders in examples respectively.
   
   

5. Change the header file
   and change the #include <Gizwits.h> in the networkConfig.ino file above to #include "Gizwits.h"

6. Comment out the serial port printing code, a part of the screenshot is shown below.


7. Upload the board
Select the corresponding Arduino development board type, port number, and upload.

8. Configure the network
Open the APP downloaded from the official website and press and hold KEY2 to enter the configuration mode.

8. View the APP page with successful configuration

I will create specific functions later, you can pay attention to the following

annysky2012

Thanks for sharing~~~

w494143467

Not bad! It feels easy to operate!

Jacktang

The steps for configuring the network are described in more detail.

freebsder

It seems that network access is not complicated and is more suitable for electronic engineers to operate