Solution to the problem of not being able to generate electrical connection network using Harness in Altium Designer

通宵敲代码

Solution to the problem of not being able to generate electrical connection network using Harness in Altium Designer [Copy link]

Recently, I used Altium Designer 17 to draw PCB for a project. Because the wiring was slightly complicated,
I used the Harness function. When generating the PCB, I found that no electrical connection was generated.
After troubleshooting, I found that I needed to adjust the following options in the SCH view.

qwqwqw2088

Thanks for sharing

Harness is used for hierarchical schematic design