[AT-START-F403A Evaluation] Part 1 FreeRTOS System IAR Environment Construction

uuxz99

[AT-START-F403A Evaluation] Part 1 FreeRTOS System IAR Environment Construction [Copy link]

 

I had some knowledge of Arteli's products through a friend's recommendation a year ago. My current project is coming to an end, and I have started many evaluations for the new project. The evaluation based on the freeRTOS system is one of them. I just got the development board yesterday and transplanted the latest freeRTOS version 10.4.1. I ran three lighting tasks very smoothly. The brief process is as follows:

1. Download the latest version from the freeRTOS official website ( https://www.freertos.org/ ).
2. Establish the IAR evaluation engineering framework.

3. 

4. Copy the AT32 standard library to the project Stdlib directory

5. 

6. Copy AT32F403A startup file Startup

7. 

8. Copy the freeRTOS core and port files

9. 

10. Add the freeRTOS configuration file to make a simple configuration first, and then make adjustments as the evaluation work progresses.

11. 

12. Add a program entry point main.c, copy it from the freeRTOS demo program and modify it slightly.

13. 

14. Write the three-light gpio driver file atgpio_eval.c

15. 

16. Create three lighting tasks

17. 

    

18. After some compilation and troubleshooting, it ran

19. 

okhxyyo

Yatli AT-START-F403A review summary
https://en.eeworld.com/bbs/thread-1143018-1-1.html

freebsder

It was up and running so quickly, IAR support is very much to my liking.

powerlove

It started running so quickly, the speed is still quite good, thanks to the host for sharing the information selflessly, thank you.