TI_C2000 MCU portfolio expands real-time control resources through distributed architecture

fish001

TI_C2000 MCU portfolio expands real-time control resources through distributed architecture [Copy link]

In the real-time power conversion field that continues to demand higher performance and efficiency, it is critical for designers to invest in scalable and sustainable industrial and automotive power conversion solutions. This demand in turn leads to the demand for real-time control system resources, such as the number of MCUs with millions of instructions per second (MIPS) computing power, pulse width modulators (PWMs), and analog-to-digital converters (ADCs) in servo drive systems, power and grid infrastructure, and on-board charging applications. This also leads to the need for developers to build and maintain their product lines in a simple and low-risk manner. Performance scalability and product portfolio compatibility provide developers with a labor-saving and cost-effective way to expand real-time control resources and maintain a platform for long-term power conversion solutions.

Scaling real-time control resources through distributed architecture

The rise of renewable energy sources has driven the use of higher power levels in applications such as solar inverters. As power levels increase, more real-time control resources such as MIPS, PWM, and ADC are needed, which play a vital role in the power conversion process. The typical approach to addressing this demand is to control multiple power stages in a solar inverter system through a single central controller. What happens when this controller is not resourceful enough to address higher power levels and an increasing number of power stages? Distributed architecture is the best solution to this problem.

The idea of a distributed architecture is to connect multiple real-time control MCUs to expand the number of available system resources and peripherals. This implementation enables designers to achieve the performance and efficiency required for their products without compromising product performance.

- Cost of multi-chip solutions

- Complexity of connecting multiple devices through isolation and interface speed

- Lack of peripherals with external memory interface on the host/main processor

Texas Instruments' C2000 real-time control MCU portfolio addresses these three issues and realizes the true value of distributed power conversion architectures:

- The latest version of Texas Instruments' C2000 real-time control MCU series, the TMS320F28002x series, is low-priced and can help designers optimize BOM costs through distributed architectures. The rich features in the C2000 real-time control MCU series, such as accelerators, configurable logic, analog comparators, and peripherals, can further optimize system architectures.

- Fast Serial Interface (FSI) enables reliable and robust high-speed chip-to-chip or board-to-board communication at speeds up to 200 MBPS. FSI offers advantages over other interface protocols such as CAN or SCI. The low speed and lack of slew rate compensation of CAN or SCI make them unsuitable solutions for connecting multiple MCUs for isolated communication. Due to the inherent slew rate compensation and speed of FSI, connecting multiple MCUs for resource scalability becomes a labor-saving and robust interface option. Figure 1 shows how FSI can be used to connect multiple real-time control MCUs for extended MIPS, PWM, and ADC in solar inverters and other applications.

- The Host Interface Controller (HIC) introduced in the F28002x enables the MCU to act as a bridge, ultimately enabling the host processor to indirectly gain access to FSI and other peripherals on the controller. Whether or not FSI is available on your host processor, the F28002x allows designers to achieve scalability through a distributed architecture.