Recommendation: Zhongying Electronics' 69P21.
Let me talk about a project I have done.
It was a controller with a timer function for a brand. The timer part used Zhongying Electronics' 69P21.
I had a very deep impression that
I made about 200,000 pieces. After burning, I put on SMT patches and then ran the production test function.
In total, only about 10 chips were found to be defective. Because the burning was encrypted, there was no way to determine whether it was a defective burning or a defective chip itself.
The failure rate is very low.
SH69P21CV2.0.pdf
(212.6 KB, downloads: 2)
Features
4-bit MCU based on SH6610C
OTP ROM: 1K X 16 bits
RAM: 88 X 4 bits
- 24 system control registers
- 64 data memories
Operating voltage: 2.4V-5.5V
- fOSC = 30kHz - 4MHz, VDD = 2.4V - 5.5V
- fOSC = 4MHz - 8MHz, VDD = 4.5V - 5.5V
11 CMOS bidirectional I/O ports
4-level stack (including interrupts)
One 8-bit auto-reload timer/counter
Warm-up counter
Interrupt sources:
- External interrupt 0: PORTA.0 (falling/rising/both edges)
- Timer 0 interrupt
- External interrupt: PORTB (falling edge)
Oscillator: (code option)
- Crystal resonator: 32.768kHz, 400kHz - 8MHz
- Ceramic resonator: 400kHz - 8MHz
- External RC oscillator: 400kHz - 8MHz
- Internal RC oscillator: 8MHz
Instruction cycle time (4/fOSC)
Two low power operation modes: HALT and STOP
Reset
- Built-in watchdog timer (code option)
- Built-in power-on reset (POR)
- Built-in low voltage reset (LVR)
Built-in low voltage reset function [two monitoring levels] (code option)
14/8-pin SOP package, 10-pin SSOP package
OverviewSH69P21
is an advanced CMOS 4-bit microcontroller. The device integrates SH6610C CPU core, RAM, ROM, timer, I/O port and 8MHz high-precision
internal RC.SH69P21 is suitable for electric vehicle alarm, home appliances (such as lamp remote control) applications.
A very simple timer. Simple in the sense of not malfunctioning, so simple that you will forget it’s there!
|