Is there anything wrong with this STC procedure?

sky999

Is there anything wrong with this STC procedure? [Copy link]

IapErase(0x2000);
	for(i=0;i<64;i++)
	{
		IapProgram(0x2000+i,i);
	}
	b=IapRead(0x2001);

This is the EEPROM program of STC. Logically, the value of b should be 1, right? Why is it 63?

小王同志

When you read after the loop is finished, isn't it from adding to 63? Your grammar is really lacking.

sky999

Comrade Xiao Wang posted on 2020-6-12 08:56 After the loop is executed, isn't it from adding to 63? Your grammar is really lacking

No, it should be a bug in STC. I have studied it for a long time and confirmed that it is not a program problem.

小王同志

sky999 posted on 2020-6-12 10:25 No, it should be a bug in STC. I have studied it for a long time and I am sure it is not a program problem

It's your program's problem.

呦，阿里阿朵

Comrade Xiao Wang posted on 2020-6-12 17:01 It's your program problem

This section is fine. Although it is added to 63 at the end, only the first address is read.

呦，阿里阿朵

It is recommended to post the whole thing so that it is easier to analyze.

freebsder

What data is read out in full?