Resenas E1 downloads HEX to the R5F51115 chip

hcwz

Resenas E1 downloads HEX to the R5F51115 chip [Copy link]

Hello everyone, I am a novice. When I use E1 to download data to the R5F51115ADFM chip, it prompts that the connection fails. Is it because the hardware is not connected correctly? I refer to the connection method in the attachment, and I pull up the VCC of E1 to TOOL0 with a 1K resistor.

兰博

You can @ several moderators directly, or ask them questions directly.

For example, @dcexpert, @huo_hu, @RCSN

hcwz

Lanbo posted on 2020-4-15 11:07 You can directly @ a few moderators, or ask them questions directly. For example, @dcexpert, @huo_hu, @RCSN

Thanks for the tip, but I don't know how to do it!

hcwz

Now I can download, but every time I re-download, it prompts that the ID CODE is bad. I can download PASS by forcibly clicking OK. If I use the command line to operate, the dialog box of bad ID CODE cannot be popped up, and it fails directly. I disabled the ID CODE check in the download software, but the dialog box still pops up. Can any expert give me some advice?