Do you need to persist?

aq1261101415

Do you need to persist? [Copy link]

 

After the circuit is determined, the components are selected, and the batch production has been going on for a long time. As a result, the boss often changes in order to reduce costs. For example, the MOS tube manufacturer has been determined, and the supply has been long, and there are few defective products. As a result, the boss often changes the manufacturer to replace the MOS tube, the resistor, the capacitor, and the microcontroller, and only considers the low price. Now there are piles of defective products. I often remind him not to change easily, but he still wants to continue to change. Do I still need to keep reminding him? After all, he doesn't understand. I feel like the company is going to collapse.

wsmysyn

Then change the boss.

大小家伙好

Change the boss

whuer

Find a way out soon.

PowerAnts

Component replacement for production models must be verified by the Production Engineering Department and Quality Department, and confirmed by R&D.

freebsder

Isn't this good? Your boss has great ideals, insisting on being a manufacturer of production and testing products for low-priced device manufacturers, and improving the national electronic industry with his own efforts. If this is not a conscientious enterprise, then what is it? It's good.

1399866558

Many companies are like this, and the previous company did the same. Anyway, the test number's own design is fine, and the problem that occurs when changing the device is not your problem.

In my previous company, I was a soldier. When I was replacing MOS tubes before batch production, I told them directly that I would not be responsible if there was any problem. Later, I couldn't stand this way, and there were too many villains around me, so I took the initiative to withdraw and left my body intact.

When you replace the MOS tube, you actually need to adjust many parameters. If you just replace it, there will be problems in many cases.

qwqwqw2088

Why does the boss need components?

What is the reason

Who has the final say on whether component parameters are appropriate?

generalcircuits

Blindly saving money and reducing product quality will lead to a cold

willigohee

Be prepared to retreat

飞鸿浩劫

A product that sells in large quantities

ddllxxrr

This is the prelude to collapse

led2015

In today's design, there are always countless accidents that go wrong, and there will always be defective products. This is how overtime comes about.

SensorYoung

Ensure quality first and then reduce cost,,,,

You can't play it backwards, or you'll capsize.

led2015

SensorYoung posted on 2019-10-13 11:39 Ensure quality first and then reduce costs...

Everyone knows that quality must be guaranteed first, but now customers are less and less demanding of cost, which makes it difficult to deal with. People won’t listen to what we say.

RF-刘海石

qwqwqw2088 posted on 2019-10-6 16:17 Why does the boss need components? What is the reason? Who has the final say on whether the component parameters are appropriate?

I have experienced this before. It was mainly a cost issue. I kept searching, experimenting, and making changes.

RF-刘海石

Feihong Haojie published on 2019-10-9 13:08 Products that sell in large quantities

I guess it must be a product with large volume and small profit. Only such products will constantly look for cheap components to achieve the maximum profit. For example, if a component costs 1.9 cents, they will never use a component that costs 2 cents. It's all about profit. . . .

RF-刘海石

I think a few reminders are enough. Whether you listen or not depends on your boss's attitude. Just do your job well. If you feel tired (physically and mentally), then change your job. But there is no guarantee that you will meet a suitable boss. As long as there are bulk orders, I guess this company should not collapse at present.

zhucheyongdeya

Change of boss

btty038

The boss's pursuit of maximum profit and the technician's pursuit of reliability are always contradictory. Find a balance point