How to delete the top level in AD

平漂流

How to delete the top level in AD [Copy link]

How to delete the top or bottom layer of PCB in AD, keep only the bottom or top layer silk screen, and export PDF for easy soldering of components

qwqwqw2088

I don't understand the landlord's problem

It is made into a board.

Or make a silk screen file to guide welding, such as a steel mesh,

How to make a board without top and bottom layers?

For silk screen file assembly, the top and bottom wiring layers can be hidden.

btty038

Hello, if you want to make an assembly drawing, you can hide top/b and only leave the upper and lower silk prints.

曹伟1993

You are talking about exporting assembly guide files, right? If you don't know how to generate one, just generate a PDF for each layer. There are also many tutorials on the Internet.

https://wenku.baidu.com/view/cd84a069d1f34693dbef3e28.html

平漂流

btty038 posted on 2019-10-1 04:35 Hello, if you want to make an assembly drawing, you can hide the top/b and leave only the upper and lower silk prints

OK, thanks, it's fixed.

Hide all layers, leaving only the TOP/BOTTOM overlay. Then when exporting to PDF, delete all layers, leaving only the TOP/BOTTOM OVERLAY.

平漂流

Cao Wei 1993 posted on 2019-10-8 14:47 You are talking about exporting the assembly guide file. If you can't generate it, generate a PDF for each layer. There are also many tutorials on the Internet htt ...

OK, thanks

btty038

平漂流发表于2019-10-9 11:47 OK, thank you, I have already hidden all layers, leaving only the TOP/BOTTOM overlay. Then when exporting PDF, delete all layers, leaving only...

平漂流

qwqwqw2088 posted on 2019-9-30 16:49 I don't understand the original poster's question. Is it to make a board, or to make a silk screen file to guide welding, such as a steel mesh,, to make a board, without a top and bottom layer, how to do it...

Thank you, the problem has been solved. Just make a PDF (as shown in the screenshot below) based on the location of the components on the board and their properties, and then print it out. When manually soldering the circuit board, you don't have to look for them one by one according to the BOM table. The PDF screenshot is as follows

平漂流

qwqwqw2088 posted on 2019-9-30 16:49 I don't understand the original poster's question. Is it to make a board, or to make a silk screen file to guide welding, such as a steel mesh,, to make a board, without a top and bottom layer, how to do it...

Thank you, the problem has been solved. Just make a PDF based on the location of the components on the circuit board and their properties (screenshot as shown below). Then print it out. Based on this file, you can quickly locate the components to be soldered. It is a bit slow to find components using the BOM table.

qwqwqw2088

Pingpiaoliu published on 2019-10-10 18:06 Thank you, the problem has been solved. Just make a PDF based on the location of the components on the circuit board and their properties (screenshot as shown below). Then...

It is the silk screen PDF that the process personnel use to guide welding.

The shortcut key FFF can also be used

Or generate assembly PDF settings

Note that if you need to print the top layer, hide the top layer traces and hide all the bottom layer traces.

When printing the bottom layer, remember to mirror it.