NUCLEO_G431RB Review (1) Compilation Environment Settings

wenyangzeng

NUCLEO_G431RB Review (1) Compilation Environment Settings [Copy link]

NUCLEO_G431RB Review (1) Compilation Environment Settings

I received the NUCLEO_G431RB development board, which looks basically the same as the traditional NUCLEO64.

One of the highlights of NUCLEO_G431RB is that it integrates ST's latest STLINK-V3 downloader, which uses a 25MHZ crystal oscillator and the interface of the DEBUG downloader is changed to a 10-pin connector with a 1.27mm pitch. ST LINK-V3 can greatly improve the debugging and downloading speed.

The LSE (32KHZ) and HSE (24MHZ) crystal oscillators on the board have been soldered.

CubeMX needs to download STM32G4 Packages V1.1.0

MDK needs to add Keil STM32G4xx_DFP1.1.0

Preparation work is basically completed

This content is originally created by EEWORLD forum user wenyangzeng . If you want to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source

ohahaha

Thanks for sharing, the board looks great!

xiyue521

666