Micropython can be simulated in proteus

dcexpert

Micropython can be simulated in proteus [Copy link]

 I just tested it and found that in the latest proteus8.9, micropython can be simulated.

zy459994202

Thumbs up to the OP!!!

rychong

Could you please upload a simulation file and the MicroPython firmware in hex format?

rychong

Could you please upload a simulation file and micropython firmware in hex format? I simulated according to your method, but the problem I encountered was that the simulation would freeze and the program would crash. The development board I chose was STM32F401RE, and the firmware was the STM32F4Discovery version of dfu downloaded from the Micropython official website, and then converted to hex using dfu file manager. I encountered two problems, one was that COMPIM in Proteus could not recognize the virtual serial port of VSPD, and the other was

dcexpert

rychong posted on 2019-5-27 16:25 OP, can you upload a simulation file and micropython firmware in hex format? I simulated according to your method, but the problem I encountered was that as soon as I started the simulation...

I shared a routine a few days ago: https://en.eeworld.com/bbs/thread-1077856-1-1.html proteus cannot directly display the virtual serial port, but you can directly enter the serial port number. The baud rate also needs to be entered manually, and there is no 115200 in the selection box.