3543 views|4 replies

1

Posts

0

Resources
The OP
 

Looking for an AM receiver chip that can demodulate the aviation frequency band [Copy link]

Hello everyone! I want to find a demodulation chip that can demodulate aviation voice (frequency band: 118~137MHz, AM modulation), please recommend it. Thank you!!
This post is from Analog electronics

Latest reply

The AGC part itself is more difficult to handle and it is easy to introduce noise  Details Published on 2019-5-14 20:17

2w

Posts

341

Resources
2
 
Directly use RTL2832U+R820T2 chipset 100KHz-1766MHz, the working frequency range is all shortwave amateur bands
This post is from Analog electronics

Comments

Hahaha, good idea, TV stick,,,,, SDR, very cheap and cost-effective  Details Published on 2019-5-14 15:43
 
 

938

Posts

0

Resources
3
 
qwqwqw2088 posted on 2019-5-14 14:24 Directly use RTL2832U+R820T2 chipset 100KHz-1766MHz, the working frequency range is all shortwave amateur bands
Hahaha, good idea, TV stick,,,,, sdr, very cheap and cost-effective
This post is from Analog electronics
 
Personal signature地址:江苏省南京市雨花台区
淘宝店铺:http://shop60936514.taobao.com/?spm=2013.1.0.0.4lAmV3
本小店都是自主研发,低噪放、小功率功放、混频器、LC滤波器、
 
 
 

938

Posts

0

Resources
4
 
A few days ago, a company asked me to work on this aviation receiver. I am only halfway done. I have not finished it yet. I used the common down-conversion method to make it, filter, low noise amplifier, mixer, local oscillator, intermediate frequency filter, AGC, and then I want to use ADI's detection chip to detect the envelope, filter, and voice amplification. I feel that the most important part here is the AGC part. The amplitude of the AM signal directly affects the hearing. So AGC must be used.
This post is from Analog electronics

Comments

The AGC part itself is difficult to handle and it is easy to introduce noise  Details Published on 2019-5-14 20:17
 
Personal signature地址:江苏省南京市雨花台区
淘宝店铺:http://shop60936514.taobao.com/?spm=2013.1.0.0.4lAmV3
本小店都是自主研发,低噪放、小功率功放、混频器、LC滤波器、
 
 
 

2w

Posts

341

Resources
5
 
RF-Liu Haishi published on 2019-5-14 15:48 A few days ago, a company asked me to do this aviation reception. I am only halfway done and have not finished it yet. I used the ordinary down-conversion method to do it...
The AGC part itself is more difficult to handle and it is easy to introduce noise
This post is from Analog electronics
 
 
 
 

Guess Your Favourite
Find a datasheet?

EEWorld Datasheet Technical Support

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号
快速回复 返回顶部 Return list