ohahaha

DI-123 - 9.65 W, dual output power supply for residential heating control

DI-123 - 9.65 W, Dual Output Power Supply for Residential Heating Control

Overview

Design highlights: 1. Simple, low-cost design requires only 38 parts 2. No-load power consumption <150 mW at 230 VAC input 3. Meets CEC/ENERGY STAR active mode efficiency and none 4. Load input power requirements 5. Two Outputs all exhibit good cross-regulation 6. Compliant with CISPR-22 Class B/EN55022 B No input required 7. X or Y capacitor or input common mode choke

Design Files

di123

Related Devices

Devices	Class	introduce	Datasheet
TinySwitch-III		Energy-Efficient Off-Line Switcher with Enhanced Flexibility and Extended Power Range	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-21 20:07:25

Share how to handle a large number of MSP430 registers
[size=4] There are too many MSP430 registers, and it is too difficult to remember every one of them. Therefore, it is recommended that you remember the important and commonly used registers when learn
Design of Ultra-High Power Rectifier for Aluminum Electrolysis
Abstract: This paper mainly introduces the technical parameters and structural design of 220kA, 1220V, ZHS type ultra-high power rectifier for electrolytic aluminum, in order to achieve the requiremen
Today I saw an electromagnetic pulse protector, and I will test its specific parameters for you.
Electromagnetic pulse (EMP) is a physical phenomenon. It is mainly used to destroy enemy electronic equipment. The longest duration of an electromagnetic pulse is usually only one second. It is a sudd
AD9958
请问AD9958读寄存器读出来的为什么总是FEFEFEFE [code] u8 AD9958_ReadByte(void) {u8 i,dat=0;CS=0;SCLK=0;for (i = 0;i<8;i++){SCLK = 0;dat|=SDIO0;SCLK = 1;dat <<= 1;}SCLK=0;IO_Update();CS=1;return dat; }u32 Read_Vau1(u8
Why are multiple register access instructions needed?
[size=4]ldr/str can only access 4 bytes of memory per cycle. If you need to read or write memory in batches, it is too slow. The solution is stm/ld[/size] [size=4]For example (uboot start.S line 537)
Wireless Security
[i=s]This post was last edited by fish001 on 2018-11-14 21:03[/i] [size=4] This mainly involves WEP, WPA, WPA2 and RC4, TKIP, AES. [/size] [size=4] IEEE 802.11 sets technical standards, while Wi-Fi Al

Datasheet More

Circuits More