newlandmark

Ingress colorful character ws2812 light board

Overview

I touched an ingress special light board for colorful characters. The arduino nano drives a total of 145 ws2812b-2020led lamp beads. The length of the board is a little bit short of 10 cm. I can’t control the amount of tin with a needle tube. About a quarter of it is connected to the tin. Use a multimeter. The diode level is measured one by one from the DI pin to the ground. The normal value is 500 to 600. More than 300 is connected to the power supply. It is very labor-intensive to repair. The steel mesh should not be saved; the program is the entry-level FastLed lighting, drawing sentences, ttl control and so on. Yes, because it hasn’t been done yet, the order of the strokes is random, friends are welcome to correct me; after welding and lighting, I feel there are some defects, the surrounding and both sides of the small box appear sparse, and it should be made completely symmetrical, and It can be used as a clock; no need to solder the capacitor.

Design Files

Related Devices

Devices	Class	introduce	Datasheet
22025403P00CKMT	The connector;Mother row needle row	Number of Pins: 3 Connector Type: Busbar Number: 1 Contact Type: Female Jack Pitch: 0.100"(2.54mm)	Download
WS2812B-2020			Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 14:16:22

Is the IRFP460 I bought a fake tube?
I've been playing around with amorphous inverters recently. I bought a pack of 460 tubes to try out for the backstage. Every time I put one on, it exploded. I was furious. I thought there was somethin
How to prevent dead waiting programs from causing other tasks to fail to run during development
[size=4]In embedded software development, such as microcontroller programs, we will definitely write a large infinite loop program, that is, polling the IO port. Usually, [/size] [size=4] [/size] [siz
Summary of 10 major issues with ZigBee technology
What technology did ZigBee originate from? 　　In the process of using Bluetooth technology, people found that although Bluetooth technology has many advantages, it still has many defects. For the field
[Mil MYD-YA15XC-T Review] +RGB dot screen
[i=s]This post was last edited by Popular Technology on 2021-11-17 23:17[/i]It's been a few days since I got the board. I tested the RGB dot screen these days. Because the development board itself doe
BQ24133 charging current accuracy
Question: What is the accuracy deviation of the charging current set by BQ24133? ? For example, I use a 1% accuracy resistor to limit the charging current to 2.21A. If the voltage division does not ch
3G will achieve unprecedented success in China [Reprint]
Hundreds of schools of thought: 3G will be an unprecedented success in China　　There is no doubt about whether China's 3G market will open, the question now is when it will surface. The issue of issuin

Datasheet More

Circuits More