ghaytweyhtoo

ESP32S3 Development Board

Overview

The maximum input of DCDC is about 4A after testing. At this time, the output voltage is about 3.10V. The heat is good, at least it is not hot to the touch. The ripple cannot be measured by the instrument.
It is recommended to use low-temperature soldering, and the temperature should not be too high during soldering! ! !

Strange phenomenon of the board
I soldered two boards and used the on-board ch340k download program. The baud rate of low-temperature soldering can reach 921600, and the baud rate of medium-temperature soldering can only be 25600.
The medium-temperature soldered board is downloaded with a USB to TTL module, and the baud rate can also reach 921600. I suspect that the soldering temperature is too high and the board has hidden damage.
Using the USB baud rate of esp32s3 itself can reach 921600.

Overall cost:
ESP32S3 N16R8 module - ￥22
CH340K - ￥2
TPS63020 - ￥2
100UF capacitor - ￥1.4
1.5UH inductor - ￥0.43
Two Type-c - ￥0.84
Two ws2812 - ￥0.36
Other parts - ≈￥2
Total: ￥31.03

Note:
TPS63020 is difficult to weld, try to use LDO power supply.
If the standby current of TPS63020 is >50ma, or there is a current sound, it is definitely a problem with your welding. (No rebuttal)

Design Files

Related Devices

Devices	Class	introduce	Datasheet
PTS810SJM250SMTRLFS	accessories;Light touch switch	Circuit structure: SPST-NO Contact rated current: 50mA @ 16VDC Button head type: Standard Button action direction: Top Actuated SWITCHTACTILESPST-NO0.05A16V	Download
0603X106M6R3NT	Passive components;The patch capacitance	Accuracy: ±20% Capacitance: 10uF Rated voltage: 6.3V Temperature drift coefficient (dielectric material): X5R Material: X5R	Download
FXL0420-1R5-M	Passive components;Power inductor	Accuracy: ±20% Rated current: 5A DC resistance (internal resistance): 46mΩ Inductance value: 1.5uH One-piece inductor alloy inductor super large inductor power inductor	Download
WS2812B-2020			Download
ERJ3EKF1002V	Passive components;The resistor	Resistance (ohms): 10K Accuracy: ±1% Power: 1/10W Temperature coefficient: ±100ppm/°C	Download
CR0603-FX-1823ELF	Passive components;SMD resistor	Resistance (ohms): 182K Accuracy: ±1% Power: 1/10W Temperature coefficient: ±100ppm/°C	Download
ESP32-S3-WROOM-1-N16R8	WIFI module		Download
TPS63020DSJR	Power/power management;The power supply circuit	Output current: 3.5A (Switch) Switch operating frequency: 2.4MHz Output type: Adjustable Number of output voltage channels: 1 Function type: Step-Up/Step-Down Output configuration: Positive chip buck/boost regulator 4A 14VSON Primary input voltage: 5.5V Number of outputs: 1 Output voltage: 5.5V Output current: 4A Package type: VSON Number of pins: 14 Minimum operating temperature: -40°C Maximum operating temperature: 85°C SVHC (Substances of Very High Concern) ): No SVHC (19-Dec-2012) Part Number: 63020 Operating Temperature Range: -40°C to +85°C	Download
AMS1117-3.3	Power/power management;Low dropout linear regulator (they)	Output type: Fixed Maximum input voltage: 18V Output current: 1A Output voltage (minimum/fixed): 3.235V	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.