Computer PCI-E x16/x1 card slot dust protector

The function of the dust protector:
This project is suitable for dust protection of PCI-E X16/X1 type slots on computers, effectively preventing the PCI-E interface from being dust-proof when not in use, and is also suitable for computer motherboard protection interfaces.
 
 ================================================== ============================================
The use of dust
protectors The use of the dust filter is as simple as inserting the graphics card or network card device into the motherboard normally. You only need to gently press [be careful to prevent foolproof cards] to perfectly install the dust filter.
 
================================================== ============================================
Easy folding design
dust protector There is a row of via holes to
make it easier to break the x16 dust filter into an x1 dust filter. Note: If the via holes fall off after breaking, please clean them in time before plugging them into the computer
 
======== ================================================== ==================================== There are 3 on
the main board of the dust protector.
The soldering pad is the power pad leading to the PCI-E interface of the motherboard. The voltages are 12v, 3.3v, and GND [ground]. These voltages will be marked in the pcb file, which can add more light effect devices to your computer.
================================================== ============================================
The effect after the installation is completed