PY32F003F2x TSSOP20 core board II

1. Based on
TSSOP20 package PY32F003F2 /
One is connected to the power supply, and the other two are led out with pin headers, corresponding to L1 and L2 respectively. During the test, use Dupont wires to connect to the pins that need to be tested.
1. The crystal oscillator can be used without soldering and only uses the built-in RC clock. If a crystal oscillator is needed, 16MHz can be used , 24MHz or 32MHz

front
! [py32f003f2t.jpg]
back
! [py32f003f2b.jpg]

# For

an introduction to development and burning of PY32F002A, PY32F003, PY32F030, please refer to the following series of articles

[https://iosetting.blog.csdn.net /article/details/128685407](https://iosetting.blog.csdn.net/article/details/128685407)

I generally use Ubuntu more, so the development environment is Ubuntu + VSCode. The project is based on ARM GCC, and the warehouse address is

[ https://github.com/IOsetting/py32f0-template](https://github.com/IOsetting/py32f0-template)

The sample code is divided into three categories according to FreeRTOS, HAL library, and LL library

[https://github. com/IOsetting/py32f0-template/tree/main/Examples](https://github.com/IOsetting/py32f0-template/tree/main/Examples)