supremeOne

NCP380LSNAJAGEVB: High-Side Distribution Switch Evaluation Board

NCP380LSNAJAGEVB: High-Side Power Distribution Switch Evaluation Board

Overview

The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 70 mΩ (DFN package), P channel MOSFET in a single package.The device limits the output current to a desired level by switching into a regulation current-mode when the output load exceeds the current-limit threshold or a short is present. The current limit threshold is either user adjustable between 100mA and 2.1A via an external resistor or internally fixed.The power switch rise and fall times are controlled to minimize current ringing during switching.An internal reverse-voltage detection comparator disables the power-switch if the output voltage is higher than the input voltage to protect devices on the input side of the switch. The /FLAG logic output asserts low during over current, reverse-voltage or over temperature conditions. The switch is controlled by a logic enable input active high or low.

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 15:16:41

【Rewarded Live Broadcast】 Speech Recognition Core Technology Lecture Begins ~ Microchip Timberwolf Audio Processor Seminar
It is estimated that by 2021, voice-controlled devices will account for 30% of smart home devices.For automatic speech recognition (ASR) and voice communication, high-performance voice processors are
When a port bit is set to falling edge trigger, and its interrupt enable bit is not set, the interrupt flag is triggered when a falling edge occurs.
The problem is twofold: Set a port bit to falling edge trigger 1. When its interrupt enable bit is 0, will the interrupt flag be set when a falling edge occurs ? 2. When the interrupt enable bit is 0,
RF coexistence testing? Is it difficult?
The current development of the international epidemic is just like that in Wuhan a few months ago, facing severe challenges brought about by a surge in infected patients, a shortage of medical resourc
The 5 yuan proofing board is back
I was careless and the vias were not covered with oil, so the appearance is flawed:loveliness:
About the history, reasons and principles of PFC power factor correction
[size=4]What is power factor compensation and what is power factor correction[/size] [size=4] [/size] [size=4] Power factor compensation: In the 1950s, an improvement method was proposed for the low p
5G RAN testing, the most comprehensive data package!
5G still has a long way to goThis year is the first year of large-scale commercial use of 5G and the first year of the 5G era (2020-2030). The curtain has just been raised on the commercial developmen

Datasheet More

Circuits More