PCB picture text

The PCB picture picture this time is used to decorate the USB docking station. The picture below is the finished product.
 
           
The picture below is a 3D preview of the PCB:
 
        
The actual picture is as follows (the proof is white):
 
 
 
 
Principle: Copper is applied to both the front and back sides (without copper, the desired effect will not be achieved), and the picture is placed on the Top Solider and Bottom Solider layers , you can realize the display of pictures (text).
 
Required software: AD (version 2020), PS
 
Part One: Image Processing
(1) Open the image with PS
(2) Click Image->Mode->Grayscale, then click OK
 
 
(3) Click Image->Mode- >Bitmap, then click OK
 
 
(4) Save the image as a file in BMP format
 
 
 
Part 2: Use of AD script
 
(1) Download the PCB-Logo-Creator script (already uploaded in the attachment), and unzip it
 
(2) Click on the file ->Run the script
                                 (3) Click on the lower left corner to browse ->From file
(4) Select the decompressed script and click to open
 
(5) Double-click the script to run
Part 3: Use the script to convert the image to PCB
(1) After opening the script The interface is as follows:
　　① Select the layer to be placed ② Mirror the X axis ③ Mirror the Y axis
(2) Click Load and select the picture to be placed on the PCB
(3) Click Convert to start converting the picture and wait for the conversion to complete
(4) Close window, copy all the lines to your PCB board, and you're done!
 
Note: If you want to place the picture on the Bottom Solider layer, you need to use PS to mirror the picture left and right.