RK3399 development board Android image burning Windows system image burning

塔7呃

RK3399 development board Android image burning Windows system image burning [Copy link]

4.1.1 l RKTool driver installation (based on Xunwei iTOP-3399 development board) DriverAssitant_v4.5.zip file, open

and the driver is successfully installed, as shown below:

Notes:
1. Currently supported operating systems include: XP, Win7_32, Win7_64, Win8_32, Win8_64.
2. After the XP system has installed the driver, if it still prompts "New device found", select "Automatic installation" when installing the driver
.
3. If an old version of the driver has been installed before, please click "Driver Uninstall" before "Driver Installation".
2 4.1.2 Burn Android firmware
Unzip the
AndroidTool_Release_v2.54.7z file in the CD-ROM 02 Tools\ Burning Tools\windows directory, as shown below:
Get the AndroidTool_Release_v2.54 folder, double-click to enter
the AndroidTool_Release_v2.54 folder, we can see two folders, as shown below:
First copy the image file we compiled to the rockdev\Image directory, as shown below:
Then return to the AndroidTool_Release_v2.54 folder directory, as shown below:
Enter the AndroidTool_Release_v2.54 directory, double-click to run
AndroidTool.exe, as shown below:
The main interface of the flashing tool will be opened at this time, as shown below:
Then use Type-C to connect the iTop-3399 development board to the PC, connect the power adapter to the
iTop-3399 development board, and then first press the vol+ button of the iTop-3399 development board (press and do not release),
then press the power button of the iTop-3399 development board to start the development board. At this time, the flashing tool will prompt that
a new device has been found (you can release the vol+ button at this time), as shown below (if your flashing tool does not find a new
device, you can close the flashing tool, reopen the flashing tool, and then repeat the above
power-on steps):
Then click the "Execute" button to start flashing the Android image, as shown below:
During the flashing process, there will be corresponding print information on the right side of the flashing tool, as shown below:
The flashing is complete. The right side of the flashing tool will prompt that the flashing is successful. The iTop-3399 development board will automatically start,
as shown below:
At this point, our flashing operation is complete. If you have purchased a Xunwei screen, you can
experience the Android 8.1 system by using the screen + touch method. If you have not purchased a Xunwei screen, you can
connect it to the monitor through the HDMI interface and experience the Android 8.1 system with a mouse.