Electric vehicles are equipped with NFC. This integrated wide voltage transformer has an input voltage of DC8-120V and a dual output of 5V+3.3V 1.5A.
The buck circuit uses OC5806L chip
Input voltage DC8-120V, dual output 5V+3.3V 1.5A
The control center is esp8266,
The relay can control a maximum current of 10A.
Integrated buzzer to feedback card swiping results.
The nfc module is RC522. This board only has interfaces. You need to purchase the RC522 module separately.
RC522 module (7.8 free shipping): https://dwz.ee/2fj
After testing, under 12.11V power supply, the current is 39.4mA and the power consumption is 0.477W.
Under 53.1V power supply, the current is 10.75mA and the power consumption is 0.57W.
Separate NFC control board without integrated power supply: 8266 controls relay via NFC - Jialichuang EDA open source hardware platform (oshwhub.com)
Separate DC step-down power supply: DCDC wide voltage step-down DC8~120V to 5V&3.3V 1.5A OC5806L - Jialichuang EDA open source hardware platform (oshwhub.com)
Detailed information: https://www.domoticz.cn/forum/viewtopic.php?p=1972
All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.
It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.
Supported by EEWorld Datasheet