张三叔

STC8H8K64S4 To DIP40 adapter board

Overview

[Physical verification passed]

1. Features

Except for P1.2, which is not available in XTAL and STC8H8K64S4, it is foot-to-foot compatible with STC12C5A and DIP40 series.
The DIP40 packaged IO is additionally leaded out on the board, and the STC8H8K64S4 IO is fully leaded out.
Documentation required filter capacitors are onboard.
ADC reference voltage source optional.

2. Description

There is no electrical connection between the XTAL and P1.2 pins on the board.
The ADC reference voltage source selection is determined by ADCRef_JMP on the back of the board. If you connect it, short-circuit ADC_Vref+ and VCC. If you leave it blank, you can connect an external reference source through the derived ADC pin.

I copied @EMZ1 ’s board, I’m so bad at it, I’m sorry.jpg.

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 17:13:59

Address alignment trap problem occurs when ARM controls FPGA IP core
The control register uses the IP base address + offset method h2p_lw_ctl_addr=virtual_base + ( ( unsigned long )( ALT_LWFPGASLVS_OFST + PIO_LED_BASE + [color=#ff0000]0x00000001[/color]) & ( unsigned l
Resonant soft switching technology and its application in inverter power supply
Resonant soft switching technology and its application in inverter power supply Abstract: In order to obtain higher performance indicators, higher efficiency, and higher power density, soft switching
What are the methods for upgrading the msp430 microcontroller program?
I am working on the custom method (using the serial port) to program the FLASH of 430. After the program is completed, the power is turned off and reset, and the reset button can run the new program.
Architecture of Wireless Sensor Networks
[size=4]Wireless sensor network: including wireless products such as wireless intelligent gateway, wireless sensor, wireless measurement and control device. [/size] [size=4] [/size] [size=4]1. Wireles
ARM LPC2292
Statements under ADS1.2: #define UART_BPS 115200 #define A_CS 0x00000800 #define B_CS 0x00001000 #define C_CS 0x02000000 #define MSTR (1<<5) #define CPOL (1<<4) Please explain this line of statement:
[NXP Rapid IoT Review] Hello LED
[i=s]This post was last edited by slotg on 2019-1-15 14:41[/i] The most famous online programming IDE is the MBED system. This is a code design method. In the online IDE environment, you still type in

Datasheet More

Circuits More